# The Marine Institute

> Curated public course and certificate information for the The Marine Institute site.

Use the sections below to find primary public catalog pages and their descriptions.

## Courses

Here is a list of the currently available courses.

- [Course 500518: Small Vessel Operator Proficiency](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16224): To provide participants with: A basic understanding of the hazards associated with the marine environment and their own vessel, as well as the prevention of shipboard incidents. The knowledge and skills necessary to safely operate a small non-pleasure vessel in near coastal and sheltered waters under normal operating conditions, including darkness and restricted visibility. Additional knowledge on aids to navigation and seamanship to supplement individual experience.
- [Course 703317: Security Awareness Training for Seafarers with Designated Security Duties](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16227): Those who successfully complete this course should be able to undertake duties and responsibilities as seafarers with designated security duties, as defined in section Table A-VI/6-2 of the STCW Code, and Section 213 of the Canadian MTSR. These duties include: to maintain the conditions set out in the vessel security plan; to have the ability to recognize security threats and risks; to gain knowledge in the use of security equipment; to undertake regular security inspections of the vessel
- [Course 202306: Basic Oil Spill Responder](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16264): Enable the student to participate safely as a member of an oil spill response team. Show the student the impact and consequences of marine oil spills. Acquaint the student with facilities and organizations responsible for responding to marine oil spills. Train the student in common oil spill cleanup strategies and techniques. Provide the student with practical, hands-on experience in operating marine oil spill containment and recovery equipment.
- [Course 201907: Marine Confined Space Entry and Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16266): To enable students to understand the dangers associated with confined space entry and the procedures to ensure safe entry. To enable students to use available equipment to facilitate the rescue of an injured entrant.
- [Course 201404: Rescue Boats](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16269): To enable the student to operate ship borne rescue boats and associated launching and retrieval devices. To enable the student to perform rescue operations using rescue boats and their associated equipment.
- [Course 203000: STCW Basic Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16270): To enable course participants to identify emergency procedures, pollution prevention, safe working practices and human relationships while in the marine environment. To enable course participants to respond to emergency situations. To enable course participants to minimize the risk of fire, to maintain a state of readiness, and to fight and extinguish fires on board a vessel. To enable course participants to survive at sea in the event of ship abandonment.
- [Course 203100: Advanced Fire Fighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16272): This course will enable participants to learn about, understand and become proficient in: Firefighting procedures at sea and in port with particular emphasis on organization, tactics and command Use of water for fire-extinguishing, the effect on ship stability, precautions and corrective procedures Communicaton and co-ordination during fire fighting operations Ventilation control, including smoke extraction Control of fuel and electrical systems Firefighting process hazards (dry distillation, chemical reactions, boiler uptake fire, etc.) Firefighting involving dangerous goods Fire precautions and hazards associated with storing and handling materials (paints, etc.) Managing and controlling injured persons Procedures for co-ordination with shore-based firefighters Preparing contingency plans Composition of fire parties and allocation of personnel to fire parties Strategies and tactics for controlling fires in various parts of the ship Fire-detection systems Fixed fire-extinguishing systems Portable and mobile fire-extinguishing equipment, including appliances, pumps and rescue, salvage, life-support, personal protective and communication equipment Requirements for statutory and classification societies Assessing cause of incidents involving fire
- [Course 202718: Transportation of Dangerous Good - Marine (IMDG)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16273): To enable students to define the nine classes of dangerous goods and their associated hazards; To enable students to recognize proper shipping names, classes, UN numbers and packing groups for dangerous goods; To enable students to identify dangerous goods and how to use the IMDG code in planning packaging, handling, stowage, and transportation of dangerous goods; To enable students to identify safety marks, such as labels and placards, used to identify the different classes of dangerous goods; To provide students with knowledge about the information that must be on a shipping document; To provide students with knowledge of the requirements regarding stowage, mixed loads and the need for segregation of incompatible dangerous goods; To provide the students with knowledge to choose the proper means of containment for dangerous goods; To provide students with knowledge about what to do if the shipping documents, placards, labels other safety marks or means of containment seem inadequate or incorrect; To enable students to identify dangerous goods emergencies and how to use the IMDG supplement in coping with emergencies.
- [Course 200103: Officer in Charge of Shipboard Helicopter Operations (Canadian Coast Guard)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16274): To provide participants with knowledge of the hazards inherent to shipboard helicopter operations. To enable participants to conduct helicopter operations safely and efficiently. To provide participants with knowledge about appropriate helicopter fueling procedures.
- [Course 202314: Shipboard Helicopter Firefighting and Rescue Course](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16275): To enable participants to identify the major components of helicopters. To provide participants with the knowledge required to properly use helideck rescue and fire safety equipment. To provide participants with the ability to perform helideck rescue and firefighting operations in simulated helicopter emergencies.
- [Course 202223: Compressed Air Helicopter Underwater Emergency Breathing Apparatus (HUEBA)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16276): To provide the student with the knowledge and skills to identify the hazards and limitations of compressed air Helicopter Underwater Emergency Breathing Apparatus. To provide the student with the skills to perform pre-flight inspection of compressed air Helicopter Underwater Emergency Breathing Apparatus. To provide the student with the skills to use compressed air Helicopter Underwater Emergency Breathing Apparatus.
- [Course 201409: Fast Rescue Boat](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16277): To enable course participants to learn about, understand and become proficient in: The construction and outfit of fast rescue boats and individual items of their equipment Particular characteristics and facilities of fast rescue boats Taking safety pre-cautions during launch and recovery of a fast rescue boat Properly righting a capsized fast rescue boat Properly handling a fast rescue boat in prevailing adverse weather and sea conditions The navigational and safety equipment in a fast rescue boat Search patters and environmental factors affecting their execution Assessing the readiness of fast rescue boats and related equipment for immediate use The maintenance, emergency repairs, normal inflating and deflation of buoyancy compartments of inflated fast rescue boats Properly starting and operating a fast rescue boat engine and its accessories
- [Course 202202: Helicopter Landing Officer](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16278): To provide participants with knowledge of the hazards inherent to helideck operations. To enable participants to conduct helideck operations safely and efficiently. To provide participants with knowledge about appropriate helicopter fuelling procedures
- [Course 202204: Helicopter Refuelling](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16280): To provide participants with safe and effective procedures for refuelling aircraft on an offshore installation. To familiarize participants with the operation of helideck refuelling equipment.
- [Course 202209: Helideck Team Training](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16281): To provide participants with the knowledge required to safely accomplish assigned helideck tasks. To familiarize participants with the features of a designated helicopter.
- [Course 203400: Naturally Occurring Radioactive Materials (NORM)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16282): To provide the student with an awareness of natural occurring radioactive materials. To inform the student about the standards and guidelines governing natural occurring radioactive materials. To inform the student about the safe exposure limits of natural occurring radioactive materials. To provide the student with information on management programs for natural occurring radioactive materials. To provide the student with information on standards for the transportation of natural occurring radioactive materials.
- [Course 202000: Offshore Fire Team](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16283): To enable students to understand why a fire behaves in a particular manner. To enable students to identify the advantages and limitations of personal protective equipment. To students with the knowledge to identify and correctly use firefighting equipment and techniques. To highlight the importance of teamwork during an emergency response. To provide students with knowledge of the inherent hazards of helicopter components and the ability to safely perform helicopter firefighting and rescue. To introduce new methods and technology in fire suppression onboard installations in the offshore oil industry.
- [Course 202005: Offshore Fire Team Recurrent](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16284): To provide students with a review of the proper use of firefighting equipment To enable students to practice firefighting and rescue techniques
- [Course 202014: Offshore Fire / Emergency Response Team Leader](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16285): To enable participants to understand the roles, responsibilities, and functions of the Fire Team Leader. To provide participants with the knowledge and skills required to lead a team during an incident. To enable participants to practice leadership skills during simulated emergency scenarios.
- [Course 202201: Offshore Helicopter Firefighting and Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16286): To enable students to identify the major components of a helicopter and its related fire safety hazards. To enable students to identify helicopter crash rescue and fire safety equipment. To provide students with the ability to perform rescue and firefighting procedures.
- [Course 201408: Offshore Survival Introduction (OSI)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16289): To provide participants with updated knowledge, skill, and proficiency regarding: Hazards associated with the marine environment, offshore petroleum installations, and helicopters Personal responsibilities during an offshore emergency Caring for self in a survival situation
- [Course 202011: Confined Space Technical Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16290): To enable participants to develop safe and efficient rescue plans for confined space emergencies through the use of situational analysis and pre-planning. To provide participants with the knowledge and practical skills required to execute a confined space rescue plan.
- [Course 203403: Basic Aircraft Rescue and Firefighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16296): Qualification for Aircraft Rescue and Firefighting Personnel Airport Familiarization Aircraft Familiarization ARFF Firefighter Safety Aircraft Rescue and Firefighting Tactical Operations Live Fire Training
- [Course 203412: Fall Protection (Offshore)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16297): To provide the student with a basic knowledge of fall protection and fall arrest systems. To enable students to inspect and don a fall protection harness. To enable students to inspect fall arrest systems. To familiarize students with basic rescue considerations.
- [Course 202022: Confined Space Entry (CAPP 2013-0007)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16298): To enable students to recognize a confined space environment. To enable students to identify and control hazards in a confined space environment. To provide students with basic knowledge of confined space work permit system. To provide students with a basic knowledge of reporting confined space accidents/incidents. To familiarize students with basic confined space rescue planning.
- [Course 200832: Confined Space Entry (WHSCC)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16300): To enable students to: Recognize a confined space environment Identify and control hazards associated with confined spaces Gain basic knowledge of the confined space work permit system Understand the procedures for reporting confined space accidents and incidents Become familiar with basic confined space rescue planning
- [Course 203405: Fall Protection (WHSCC Approved)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16301): To provide the student with a basic knowledge of Fall Protection and Fall Arrest Systems. To enable students to select, inspect, assemble, don and use Fall Arrest Equipment. To provide students with the basic knowledge of a Fall Protection Plan. To familiarize students with the basic knowledge of reporting accidents/incidents. To familiarize students with basic rescue considerations.
- [Course 200812: Portable Fire Extinguishers and Standpipe Systems](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16302): To enable the student to readily identify the correct type of extinguisher for the different classes of fire. To enable the student to efficiently activate a portable fire extinguisher and extinguish a fire. To enable the student to conduct a basic inspection of a fire extinguisher. To enable the student to efficiently deploy a standpipe hose and place it in operation.
- [Course 200708: Industrial Firefighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16304): Enable the student to identify the advantages and limitations of personal protective equipment (PPE). Help the student develop appropriate fire attack strategies. Enable the student to recognize the importance of using a team approach in emergency situations.
- [Course 201200: Self Contained Breathing Apparatus (SCBA)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16305): Provide the student with knowledge about the importance of regulations and standards related to the use and care of respiratory protection. Provide the student with the knowledge and skills to identify and correctly use a Self-Contained Breathing Apparatus (SCBA). Provide the student with the skills to respond to an air supply interruption. Provide the student with the skills to perform a simple rescue while wearing an SCBA. Provide the student with the knowledge to inspect and maintain an SCBA.
- [Course 201707: Industrial Worksite Emergency Response](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16307): To provide basic training in emergency response for personnel on industrial worksites. To provide awareness and competencies in the response to emergencies including fire, chemical and/or oil spills, and emergencies involving casualties.
- [Course 201315: Toolbox Talks](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16308): 1.0 Toolbox Talks 2.0 Standards and Regulations 3.0 Planning and Preparing Toolbox Talks 4.0 Conducting Toolbox Talks 5.0 Documentation
- [Course 202707: Transportation of Dangerous Goods Initial (Road)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16309): To enable participants to acquire a sound knowledge of all the topics listed below as taken from the TDG Regulations that relate directly to the participant's duties and to the dangerous goods the participant is expected to handle, offer for transport or transport:  the classification criteria and test methods in Part 2, Classification. shipping names. the use of Schedules 1, 2 and 3. the shipping document requirements in Part 3,3, Documentation; the dangerous goods safety marks requirements in Part 4, Dangerous Goods Safety Marks. the certification safety marks requirements, safety requirements and safety standards in Part 5, Means of Containment; the emergency response assistance plan requirements in Part 7, Emergency Response Assistance Plan; the report requirements in Part 8, Accidental Release and Imminent Accidental Release Report Requirements; safe handling and transportation practices for dangerous goods, including the characteristics of the dangerous goods; the proper use of any equipment used to handle or transport the dangerous goods; the reasonable emergency measures the person must take to reduce or eliminate any danger to public safety that results or may reasonably be expected to result from an accidentalrelease of the dangerous goods.
- [Course 201310: Marine Advanced First Aid](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16310): To provide seafarers, designated to provide advanced medical first aid or to take charge of medical care onboard a vessel, with an understanding of the tasks, duties and responsibilities associated with the designation. To provide seafarers with the knowledge and skills to take immediate action in case of accident or illness onboard a vessel.
- [Course 201309: Marine Basic First Aid](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16311): To provide seafarers, designated to provide basic medical first aid or to take charge of medical care onboard a vessel, with an understanding of the tasks, duties and responsibilities associated with the designation. To provide seafarers with the knowledge and skills to take immediate action in case of accident or illness onboard a vessel.
- [Course 703004: Internal Auditor - International Safety Management Code](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16417): This course will provide participants with the knowledge and skill to: Plan and conduct an internal audit Assess evidence Report audit findings  Apply auditing process as per the requirements of the ISM Code
- [Course 500582: Introduction to Navigating with a Global Positioning System](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16418): To introduce participants to the: Operation of a handheld Global Positioning System (GPS) Necessary skills to use a handheld GPS for basic coastal navigation
- [Course 500539: Aquaculture Work Experience](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16424): The aims of this work experience are to: Enable the student to practice skills obtained during the course component of the Technical Certificate in Aquaculture. Instill positive employment skills appropriate to the aquaculture industry.
- [Course 501315: Arctic Char Processing Workshop](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16425): To provide partipants with: Practical approach to the knowledge and skills required to produce various artic char products. Increased awareness of their role in the production of quality products with an understanding of food safety and factors affecting cost and productivity.
- [Course 500545: Basic Boat Skills](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16429): To enable participants to: Develop a basic theoretical understanding of boat handling techniques. Demonstrate practical boat handling techniques.
- [Course 500540: Basic Farm Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16430): To enable the worker/participant to: Outline the structure of Occupational Health and Safety in the workplace. Identify hazards related to working on an aquaculture site and describe methods of controlling them. Outline the procedure for accident/incident reporting. Contribute to making the workplace a safer environment.
- [Course 501500: Canned Foods and Thermal Processing](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16431): The aims of this course are to: Meet the training requirements required for HACCP-based thermal processing (canning) plant operations Meet the training requirements of the Canadian Food Inspection Agency regulations, codes, policies, and practices related to Heat Processing of Low-Acid and Acidified Low-Acid Canned Foods in Hermetically Sealed Containers
- [Course 500583: Chartwork and Navigation Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16435): This course intends to: Provide students with an overview of the geographic coordinate system, including latitude and longitude. Provide students with practical knowledge and the ability to use nautical charts to safely navigate a fishing vessel. Provide students with an overview of the magnetic compass and how to apply compass error to obtain true direction. Provide students with practical knowledge to construct a dead reckoning plot on a nautical chart. Introduce students to publications required on board a small fishing vessel and provide practical knowledge of their use. Introduce students to the international collision regulations (COLREGS) with Canadian modifications. Provide students with an understanding of the principles for keeping a navigational watch on a small fishing vessel, as outlined in STCW Code Sections A-VIII/2 and B-VIII/2.
- [Course 501300: Introduction to Statistical Process Control](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16439): This course is designed to provide the participant with an introductory level of knowledge and skills surrounding the use of statistical control charting techniques.
- [Course 501309: Fish Habitat Awareness Seminar](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16441): To enable the participant to: Develop an understanding of fish and fish habitat in the marine environment Reduce impacts to fish habitat at the planning and design stage of a development or project
- [Course 501002: Introduction to the Construction, Repair and Operation of Survey Trawls](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16442): This course will develop the participants’ ability to: Understand the development stages of otter trawling; Develop knowledge of otter trawling relative to survey trawls; Understand the principles of net making; Repair nets; Have an up-to-date knowledge of survey trawl construction and design techniques; and Understand overall survey trawling operations.
- [Course 500542: Marine Hydraulics](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16443): To enable the participant to: Develop a fundamental knowledge of hydraulics Gain familiarity with all components that comprise a typical hydraulic system Recognize the need for regular and preventative maintenance on a hydraulic system Carry out regular and preventative maintenance on a hydraulic system
- [Course 500523: Outboard Motor Maintenance](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16447): To provide participants with the: Fundamental knowledge of the components and servicing required for two- and four-stroke outboards Basic knowledge and skills needed to maintain an outboard motor
- [Course 500513: Food Safety Enhancement Program/Hazard Analysis Critical Control Point](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16449): To provide participants with an understanding of the prerequisite programs under the FSEP/HACCP program. To provide participants with an understanding of the principles involved in conducting a hazard analysis. To provide participants with an understanding of the required records and documentation under the FSEP/HACCP program. To provide participants with an understanding of the auditing requirements and program under the FSEP/HACCP program.
- [Course 500517: Introduction to Food Sanitation, Hygiene, Risk and Security](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16456): To familiarize participants with: Proper handling practices for preparing and serving food. Precautions taken to reduce the possibility of food borne illness. Recommended practices in Sanitation, Hygiene and Cleaning procedures in order to serve a safe food to consumers. Awareness of potential Bioterrorism in food.
- [Course 500527: Introduction to Food Safety, Sanitation and Microbiology](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16458): To familiarize participants with: General microbiology related to food sanitation The importance of food safety and sanitation Recommended food sanitation and hygiene practices Types of microbial testing related to food safety and sanitation Microbiological criteria
- [Course 501308: Hazard Analysis Critical Control Point](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16461): To provide participants with an understanding of the Hazard Analysis Critical Control Point (HACCP) component of Preventative Control Plans. To provide participants with an understanding of the preliminary steps of HACCP development. to provide participants with an understanding of the seven HACCP principles.
- [Course 501314: Hazard Analysis Critical Control Point Workshop](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16462): This workshop is designed to provide participants with an introductory overview of the requirements of the Hazard Analysis Critical Control Point (HACCP) system that exists in federally registered seafood processing establishments. It aims to lead participants to an increased awareness of the Hazard Analysis Critical Control Point (HACCP) system by outlining the preliminary steps of HACCP development and raising awareness of the seven HACCP principles.
- [Course 703002: Introduction to the International Safety Management Code](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16481): This course will provide participants with: An understanding of the relationship between quality systems and ISM. A basic knowledge of ISM code requirements. An understanding of the auditing process. An awareness of the risks presented in a marine environment and the potential for using ISM as a tool to safeguard against them. The ability to identify documents used in conjunction with the ISM code.
- [Course 703316: Security Awareness Training for Marine Facility Personnel with Designated Security Duties](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16482): Participants who successfully complete this course should be able to undertake the duties and responsibilities as marine facility personnel with designated security duties, as defined section 18.2, Part B of the ISPS Code, and section 307 of the Canadian MTSR, which include the ability to maintain the conditions set out in the marine facility security plan; to have the ability to recognize security threats; to gain knowledge in inspection, control and monitoring activities; to gain knowledge in the proper usage of security equipment and systems.
- [Course 100501: Bridge Resource Management (meeting requirements of Table A-II/1 of the Manila Amendments to the SCTW Convention and Code and IMO Model Course 1.22 Ship Simulator and Bridge Team Work)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16483): To enhance the participants’ awareness of Bridge Resource Management as it applies to the safe and efficient operation of ships in restricted and congested waters. To help participants understand the factors affecting human performance which should reduce the risk of accidents. To develop the participants’ awareness of the value of teamwork in difficult high risk situations. To develop the participants’ awareness of the value of and the practical use of operating procedures.
- [Course 703306: Ship Security Officer](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16484): Those who successfully complete this course should be able to undertake the duties and responsibilities as Ship Security Officer, asdefined in section A/12.2 of the ISPS Code, which include: to undertake regular security inspections of the ship to ensure that appropriate security measures are maintained; to maintain and supervise the implementation of the Ship Security Plan, including any amendments to the plan; to coordinate the security aspects of the handling of cargo and ship's stores with other shipboard personnel and with the relevant Port Facility Security Officers; to propose modifications to the Ship Security Plan; to report to the Company Security Officer any deficiencies and non-conformities identified during internal audits, periodic reviews, security inspections and verifications of compliance and implement any corrective actions; to enhance security awareness and vigilance on board; to ensure that adequate training has been provided to shipboard personnel, as appropriate; to report all security incidents; to coordinate implementation of the Ship Security Plan with the Company Security Officer and the relevant Port Facility Security Officer; and to ensure that security equipment is properly operated, tested, calibrated and maintained, if any
- [Course 703302: Shipboard Safety Officer](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16485): To provide the participant with an understanding of legislation related to shipboard occupational health and safety. To provide the participant with an understanding of the philosophy of safety, concepts of safety and safe working practices. To provide the participant with an understanding of the domestic and international measures concerning accident prevention and occupational health & safety. To enable the participant to promote a health and safety culture in the work place. To provide the participant with an understanding of the procedures to be followed and measures to be adopted for ensuring/improving safety and health on board ship, including the Safety Officer's role in onboard safety training. To enable the participant to undertake onboard risk assessments and accident investigations
- [Course 202804: Passenger Safety Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16489): Those who successfully complete this course should be able to undertake the duties and responsibilities of personnel providing direct services to passengers in passenger spaces as defined in section A-V/2 and A-V/3 of the STCW Code, which include, but are not limited to: To identify awareness of life-saving appliances and control plans. To assist passengers en route to muster and embarkation stations. To identify mustering procedures for passengers. To effectively communicate to passengers during an emergency. To demonstrate to passengers the use of personal life-saving appliances. To understand any operational limitations imposed on the ship and to understand and apply performance restrictions. To understand responsibilities with embarking and disembarking passengers with special attention to disabled persons and persons needing assistance.
- [Course 703008: Specialized Passenger Safety Management for Ro-Ro Vessels](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16494): This course is designed to meet the mandatory minimum requirements for the training of personnel aboard ro-ro passenger ships.
- [Course 101010: Dynamic Positioning Induction](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16510): At the end of the course the student should: Know the principles of Dynamic Positioning (DP). Have a basic understanding how to set up a DP system. Have an understanding of the practical operation of associated equipment, including position reference systems. Be able to recognize and respond to the various alarms, warning and information messages. Be able to relate the DP installation to the ship system, including (but not limited to); power supply, manoeuvring facility, available position reference systems and nature of work. Be able to relate DP operations to the existing environmental conditions of wind, sea state, current/tidal stream and vessel movement. Have an understanding to the Nautical Institute DP Operator's training scheme, including the requirements for completion of the logbook and the procedure for obtaining a DP certificate.
- [Course 101007: Dynamic Positioning - Offshore Loading](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16512): To enhance students' understanding of the operational aspects of a DP system when used onboard a shuttle tanker. To allow students to review operational procedures for the safe conduct of offshore loading operations. To enhance students' ability to operate a dynamic positioning system during routine and failure/emergency situations with respect to offshore loading operations.
- [Course 703010: Maritime Labour Convention 2006: Compliance for Ship Officers and Managers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16514): To provide participants with the knowledge and skill to be: Fully conversant with the requirements of the new Convention; Able to develop strategies for meeting the requirements of the Convention; and Able to verify their ships for full implementation and certification.
- [Course 705700: Global Maritime Distress and Safety System General Operator's Certificate](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16517): To help students understand the basic features of the maritime mobile service and the maritime mobile - satellite service. To provide students with the knowledge to operate the basic ship’s station equipment. To help students follow the operational procedures of the GMDSS system and subsystems. To use the English language, both written and spoken, for the satisfactory exchange of communications relevant to the safety of life at sea. To help students relate the theoretical knowledge of the GMDSS to practical communications procedures.
- [Course 705701: Global Maritime Distress and Safety System General Operator's Certificate Reexamination](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16518): To help students understand the basic features of the maritime mobile service and the maritime mobile - satellite service. To provide students with the knowledge to operate the basic ship’s station equipment. To help students follow the operational procedures of the GMDSS system and subsystems. To use the English language, both written and spoken, for the satisfactory exchange of communications relevant to the safety of life at sea. To help students relate the theoretical knowledge of the GMDSS to practical communications procedures.
- [Course 703319: Security Awareness Training for Seafarers Without Designated Security Duties](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16530): Those who successfully complete this course should be able to undertake the duties and responsibilities as seafarers without designated security duties, as defined in section Table A-VI/6-2 of the STCW Code and Section 214 of the Canadian MTSR. These duties include: to contribute to the enhancement of maritime security through heightened awareness; to have the ability to recognize security threats and risks; and to understand the need for and methods of maintaining security awareness and vigilance.
- [Course 202108: Oil and Chemical Tanker Familiarization](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16531): 1.0 Oil Tanker 2.0 Chemical Tanker 3.0 Rules and Regulations 4.0 Basic Science Concepts 5.0 Oil Tanker Cargo Handling Systems 6.0 Chemical Tanker Cargo Handling Systems 7.0 Oil Tanker Operation 8.0 Chemical Tanker Operations 9.0 Health, Safety, and Emergency Procedures 10.0 Pollution Prevention
- [Course 702803: Propulsion Plant Training Level 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16605): The student will be able to: List the machinery and associated systems and equipment which form the simulated plant. Describe and list the instrumentation used in the simulated plant for measurement. State how and where the machinery units forming the plant can be controlled. State how safe practices must always be used when preparing machinery units and associated systems for startup and operation. Observe and apply safe practices in all exercises. Prepare, start up and run the diesel electric generators. Prepare and raise steam to normal working pressure. Prepare, start and run the steam cargo turbines. Apply preparation procedures for the main propulsion engine. Prepare, start and run the main propulsion units and associated systems. Locate and apply remedial action for malfunctions or faults. Maintain a safe engineering watch. State duties associated with taking over and accepting a watch. State the routine duties undertaken during a watch. State the duties associated with handing over of a watch
- [Course 101204: Stability I (MODU)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16610): To enable participants to understand the terminology used to describe the hydrostatic and stability characteristics of floating bodies. To enable participants to understand the significance of the relative positions of the centre of buoyancy, centre of gravity, and metacentre on transverse and longitudinal stability. To develop in the participants an understanding of, and an ability to perform, calculations related to initial stability and equilibrium in the transverse direction. To develop in the participants an understanding of equilibrium in the longitudinal direction and an ability to perform calculations related to longitudinal stability. To develop in the participants a familiarity with the information contained in a vessel’s Marine Operations Manual and an ability to use this information to calculate a vessel’s stability condition.
- [Course 705702: Restricted Operator's Certificate - Maritime Commercial](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16619): Students will: know the basic features of the maritime mobile service know how to operate basic ship station equipment be able to follow GMDSS system and subsystem operational procedures relate theoretical knowledge of GMDSS to practical communication procedures
- [Course 201327: Standard First Aid (St. John Ambulance or Red Cross)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16638): Comprehensive two-day course offering first aid and cardiopulmonary resuscitation (CPR) skills for those who need training due to work requirements or who want more knowledge to respond to emergencies at home. Includes the latest first aid and CPR guidelines. Meets federal and a variety of provincial/territorial regulations for Standard First Aid and CPR. Exceeds competitors’ standards by including injury prevention content, CPR and AED. Source: Canadian Red Cross.
- [Course 701803: SEN Limited (SEN-L)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=16687): Upon course completion, the student will: Possess sufficient knowledge on the use of and setup procedure of RADAR and other basic electronic equipment found on a merchant ship. Demonstrate a proficiency in piloting and collision avoidance using the RADAR and RADAR plotting sheets.
- [Course 101106: Advanced Ship Manoeuvring: Customized Client Operations](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=19223): To demonstrate ship arrival and departures from berths. To allow personnel to become familiar with ship specific propulsion types and characteristics. To illustrate the principles of ship manoeuvring and communications as may be required by company or industry standards. To demonstrate heading control of ships under varying operational demands and conditions. To demonstrate ship emergency manoeuvres.
- [Course PC-202703: Preparatory Course for Workplace Health and Safety Committee (WHSCC Approved)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=20788): This course is intended for new members of Occupational Health and Safety Committees as defined under the Workplace Health and Safety Regulations.
- [Course PC-202702: Preparatory Course for Workplace Health and Safety Representative (WHSCC Approved)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=20789): Workplace Health and Safety Representative Training as outline by WHSCC NL.
- [Course 102200: Anchor Handling and Towing Stability](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=20796): To enable participants to understand the terminology used to describe the hydrostatic and stability characteristics of floating bodies. To enable participants to understand the significance of the relative positions of the centre of buoyancy, centre of gravity and metacentre on transverse and longitudinal stability. To develop in the participants an understanding of, and an ability to perform, calculations related to initial stability and how the additional forces applied through anchor handling and towing activities affect the vessel's stability.  To develop familiarity with the information contained in a vessel's Marine Stability Operations Manual and an ability to use this information to calculate a vessel's stability conditions. To enable students to understand and interpret information provided from a Shipboard Stability Computer. 
- [Course 100502: Bridge Resource Management Refresher](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=20820): To reinforce participant awareness of BRM as it applies to the safe and efficient operation of ships. To help participants recall the factors affecting human performance in order to reduce the risk of accidents. To remind participants that a team approach to bridge operations, taken in difficult or high risk situations, can help reduce the impact of human error on the safety of the ship. To review participants awareness of BRM concepts and the use of Standard Operating Procedures.
- [Course 101107: Helmsman Training and Assessment](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=20824): The student will be able to: Steer the ship by communicating standard helm orders. Demonstrate the appropriate skill level of steering as required by each criterion level. Demonstrate the appropriate confidence level for helmsmen and navigate at the support level for bridge personnel. Perform steering procedures to the required level.
- [Course 100703: Ship Manoeuvring (Handling)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=20865): This course will enable participants to: Appreciate the normal manoeuvring characteristics of a ship and to experience the effects of specific environmental conditions on those characteristics Identify manoeuvring techniques and practices using various equipment normally found on commercial ships Provide participants with the opportunity to practice or enhance their ship handling skills under realistic conditions using a full mission bridge simulator
- [Course 100704: Shipboard Command and Control](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=20874): Review Essential Elements of Bridge Resource Management Control, Command, and Communications Shipboard Safety Management Systems (SMS) Emergency Situation Preparedness Crisis Management Simulation
- [Course 101402: Electronic Chart Display and Information Systems](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=21738): Upon course completion, students will achieve knowledge of the basic theory and will be able to demonstrate proficiency in the following areas: Basic principles of ECDIS data, sensors and the presentation of the Electronic Navigation Chart (ENC). ECDIS operation and associated functions for passage planning and monitoring, including display options, ENC identifications, alarms, chart updating and other navigational functions. Appreciation of the limitations of ECDIS and ENC data, and awareness of the legal aspects and responsibilities associated with the use of ECDIS as an aid to navigation.
- [Course 101203: Stability II (MODU)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=21791): To enable students to calculate and understanding basic static and dynamic stability for a ship or MODU.
- [Course 101202: Stability III (MODU)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=21803): To enable students to safely operate ballast and related systems on a simulated MODU. To enable students to detect and react to simulated faults and variables which can take place in the ballast and related systems on a MODU. To prepare the students for emergencies by instructing them in pollution prevention measures.
- [Course 500547: Ropework](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=22127): To enable participants to become familiar with: Proper maintenance and inspection procedures on rope to enhance worker safety Practical knowledge in the use of ropes The mooring system on an aquaculture farm site
- [Course 500524: Salmonid Biology and Husbandry](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=22128): To enable workers/participants to gain: An understanding of the biological processes of salmonids The ability to identify the major organ systems of salmonids An understanding and appreciation of the importance of consistent and accurate record keeping An understanding of the scientific and technical principles of salmonid husbandry techniques An understanding and appreciation of the reasons for and importance of diligent water quality monitoring An understanding of fish behaviour and of the stress, injury, and mortality associated with capture and handling
- [Course 500525: Salmonid Feeds and Feeding](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=22132): To enable workers/participants to gain: An outline of the principles involving the use of feeds in fish farming An understanding of the implications of inappropriate feeding The ability to handle and store fish feeds correctly The ability to control and monitor the effective use of fish feeds
- [Course 500532: Salmonid Harvesting, Handling and Processing](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=22136): To enable the aquaculture workers/course participants to develop an understanding of: The role of harvesting, handling, and processing on product quality, and the employees’ role in promoting quality The Quality Management Program (QMP) as a food safety program and the critical role it plays in ensuring food safety The difference between the Canadian Food Inspection Agency’s (CFIA) requirements and those of a third party
- [Course 500526: Salmonid Health and Biosecurity](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=22140): This course will enable participants/workers to: Monitor aquatic animal health Adopt proper biosecurity procedures Recognize disease symptoms, report possible disease concerns, and identify methods to mitigate diseases Undertake standard disease prevention measures as part of fish husbandry practices Implement Integrated Pest Management (IPM) Plans Understand the importance of on-farm reporting and follow proper procedures
- [Course 500543: Small Diesel Repair and Maintenance](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=22603): To enable participants to be able to: Carry out minor repairs and adjustments on small diesel engines Temporarily rig various engine components to make safe harbour
- [Course 101011: Dynamic Positioning Simulation](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=23080): At the end of the course the student should: Carry out operational planning, risk assessment and hazard identification tasks. Set up the DP system for a particular task. Operate the communications. Analyze the trends. Discuss systems failures. Decide on courses of action because of systems failures. React to alarms and printer readout. Initiate DP Alert status alarms. React to all events occurring Operate the desk under normal and pressured conditions. Practice effective teamwork. Apply the lessons learned to date.
- [Course 703320: Bridge Watch Rating](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=23256): To prepare the student for entry into a marine career. To give the student a basic understanding of the organization and structure as found on a typical merchant marine vessel. To allow the student to gain the knowledge and experience necessary to become part of a crew as found on any seagoing vessel
- [Course PC-705707: Preparatory Course for Chartwork and Pilotage, Level 2](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26276): This preparatory course provides the deck officer with an in-depth knowledge of the theory and practice needed to safely navigate a vessel. This training is designed as a preparatory course to help you build the knowledge and competencies required to attempt the Transport Canada certification examinations. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705710: Preparatory Course for General Seamanship (FM3-0)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26392): Validity of Certificate of Competency International Distress Signals with Canadian Modifications Ship Handling Canada Shipping Act, 2001 and Related Regulation Pollution Prevention and Reporting Maintaining a Safe Navigational Watch and Related Bridge Teamwork Procedures Practical Rope Work including Knots, Bends and Hitches
- [Course PC-705711: Preparatory Course for General Ship Knowledge, Level 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26404): Apply FAO/ILO/IMO Safety Code for fishermen Follow safe working practices on fishing vessels Conduct boat and fire drills; know means of exit Comply with Canada Labour Code Understand Canada Shipping Act, 2001 Implement fire safety regulations Maintain life-saving equipment Apply Marine Occupational Safety & Health rules Follow Marine Personnel Regulations Comply with pollutant discharge reporting Prevent pollution and handle dangerous chemicals Follow confined space safety procedures Handle hazardous materials safely Maintain vessel certificates compliance
- [Course PC-705712: Preparatory Course for General Ship Knowledge, Level 2 (GSK2)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26413): FAO/ILO/IMO Code of Safety for Fishermen Safe Working Practices Regulations as applied to Fishing Vessels Fishing Vessel Machinery Ship’s Auxiliary Machinery Boat and Fire Drill and Means of Exit Regulations Canada Labour Code Canada Shipping Act, 2001 Fire Safety Regulations Life-Saving Equipment Regulations Marine Occupational Safety and Health Regulations Marine Personnel Regulations Pollutant Discharge Reporting Regulations, 1995 Regulations for Prevention of Pollution from Ships and for Dangerous Chemicals Safety Procedures for Confined Spaces Safety Procedures for Hazardous Materials Vessel Certificates Regulations
- [Course PC-705713: Preparatory Course for Ship Construction and Stability, Level 2](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26434): Basic ship design and construction Weather tight integrity and associated factors Transverse stability principles Practical use and interpretation of intact trim and stability data Effects of vessel operation, gear modifications, and environmental conditions on stability Effects of loading and discharging weights on vessel stability Measuring and gauging initial and overall stability of a vessel at sea
- [Course PC-705714: Preparatory Course for Ship Management, Level 1 (SM1) (Online Delivery)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26462): 1.0 The Canada Shipping Act, 2001 and Related Regulation 2.0 Pollution Prevention and Response 3.0 The Criminal Code as it applies to Ships and Ship’s Crews 4.0 International Conventions; National Legislation and Regulations 5.0 Master’s Responsibilities during times of Pilotage, Marine Occurrences, Salvage, Noting and Extending Protest and Entering Ports of Refuge
- [Course PC-705715: Preparatory Course for General Ship Knowledge, Level 3 (GSK 3)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26612): 1.0 Knowledge of the Precautions to be taken to Prevent Pollution of the Marine Environment 2.0 Anti-pollution Procedures and all Associated Equipment 3.0 Knowledge of the Pollution Prevention Requirements as Contained in the Canadian Regulations 4.0 Basic Working Knowledge of the Relevant IMO Conventions Concerning Safety of Life at Sea and Protection of the Marine Environment 5.0 Knowledge of the Canada Shipping Act-2001 6.0 Knowledge of Canadian Regulations and Vessels Documentation 7.0 Comply with Marine Occupational Safety and Health Legislation
- [Course PC-705716: Preparatory Course for Cargo, Level 2 (CG 2)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26616): The purpose of this preparatory course is to provide participants with the knowledge to monitor the loading, stowage, securing, and care of cargo during the voyage and the unloading of cargoes at the operational level as a watchkeeping Deck Officer. Specifically the course provides participants with the knowledge of the effect of cargo including heavy lifts on the seaworthiness and stability of the ship; knowledge of safe handling, stowage and securing of cargoes including dangerous, hazardous and harmful cargoes and their effect on the safety of life and of the ship; ability to establish and maintain effective communications during loading and unloading; and, Basic knowledge of the content and application of SOLAS Chapters VI, VII and XII. This course is supported by a learning management system called BRIGHTSPACE (formally Desire2Learn  or D2L). This web-based application will allow you to access all your course materials and communicate with your instructor and your classmates. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705717: Preparatory Course for Ship Construction and Stability, Level 4 (SCS 4)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26621): The purpose of this preparatory course is to provide the participant with working knowledge and application of stability, trim and stress tables, diagrams and stress calculating equipment; to understand the fundamental actions to be taken in the event of partial loss of intact buoyancy; to understand the fundamentals of watertight integrity so as to maintain the seaworthiness of the ship; and, to provide a general knowledge of the principal structural members of a ship and the proper names for the various parts. This course is supported by a learning management system called BRIGHTSPACE (formally Desire2Learn  or D2L). This web-based application will allow you to access all your course materials and communicate with your instructor and your classmates.  A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705719: Preparatory Course for Communications, Level 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26703): International Code Flags Radio Aids to Marine Navigation Annual Edition of Notices to Mariners Transmit and Receive Information by Visual Signaling Standard Marine Navigational Vocabulary
- [Course PC-705721: Preparatory Course for Meteorology, Level 2](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26707): • Describe global wind and pressure systems and their impact on weather and navigation. • Interpret synoptic and prognostic weather charts for voyage planning. • Decode and apply maritime weather forecast codes. • Identify types, formation, and movement of sea ice. • Apply safe navigation practices in ice-covered waters. • Explain the structure and weather associated with major frontal systems. • Describe the formation and behaviour of tropical revolving storms. • Identify major ocean currents and their effects on vessel operations. • Integrate weather and sea conditions into voyage planning. • Explain how sea waves and swells form and affect vessels. • Perform tide and current calculations for safe navigation.
- [Course PC-705722: Preparatory Course for Cargo, Level 3 (CG 3)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26708): The purpose of this course is to provide participants with the knowledge at the management level as a senior Deck officer to plan and ensure safe loading, stowage, securing and care during the voyage and unloading cargoes. Specifically the course provides participants with the knowledge to apply relevant international regulations, codes and standards concerning the safe handling, stowage, and securing of cargoes; knowledge of loading and unloading operations with special regard to the transport of cargoes identified in the Code of Safe Practice for Cargo Stowage and Securing; ability to establish and maintain effective communications during loading and unloading; knowledge of tanker and bulk carrier operations; and, knowledge of precautions to be taken in the carriage of dangerous, hazardous and harmful cargoes. This course is supported by a learning management system called BRIGHTSPACE (formally Desire2Learn  or D2L). This web-based application will allow you to access all your course materials and communicate with your instructor and your classmates. The examination must be written with Transport Canada.
- [Course PC-705723: Preparatory Course for Navigation Safety, Level 2 (NS 2)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=26709): The purpose of this preparatory course is to provide participants with thorough knowledge, at the management level as a senior Deck officer, of the content, application, and intent of the International Regulations for Preventing Collisions  at sea, 1972 with Canadian modifications 1983; and, thorough knowledge of the content, application and intent of the Principles to be observed in keeping a navigational watch as detailed in the STCW Code section A-VIII/2 and the Canadian Notices to Mariners –Annual Edition. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705724: Preparatory Course for Chartwork and Pilotage, Level 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=28819): The Principles of Construction of the Different Types of Nautical Charts and Their Use Nautical Publications Including the Canadian Aids to Navigation, Notices to Shipping, Notices to Mariners, CHS Chart No. 1, and Others Latitude and Longitude and the Ability to Plot the Ship’s Position by GPS Coordinates, Simultaneous Bearings, Range and Bearings, and Distance off Landmarks The Magnetic Compass and the Ability to Determine the Ship’s Heading in True, Magnetic, and Compass Degrees Direction and Courses Between Positions on a Nautical Chart Converting the Ship’s Course from True to Compass (and Vice Versa) Dead Reckoning (DR) Plotting and Comparing the DR Position to Observed Positions to Determine the Effect of Wind and Current on the Vessel The Logbook and the Importance of Good Record Keeping
- [Course 203416: HUET Including HUEBA](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=28825): To provide students with the knowledge and skills necessary to react to in-flight emergencies To provide Helicopter Underwater Escape training To provide a theoretical and practical understanding of the compressed air Helicopter Underwater Emergency Breathing Apparatus in use in the Atlantic Canada offshore petroleum industry
- [Course PC-705725: Preparatory Course for Navigation Safety, Level 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=28833): The purpose of this preparatory course is to provide an in-depth analysis of the International Regulations for Preventing Collisions at Sea with Canadian Modifications, 1983 that will allow participants to apply the rules in practical situations. In addition, an examination of the principles to be observed when carrying out a navigational watch as outlined in the STCW Code and bridge teamwork procedures will be provided.  A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course 705726: Ship Construction and Stability, Level 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=28850): This course is specifically directed towards fishing vessel operators and deals with the basic theory and application of construction and stability as it applies to fishing vessels in various conditions of load. Participants will gain an understanding of the principles on which fishing vessel stability is based that allows for the safe operation of fishing vessels under various conditions of load.
- [Course PC-705727: Preparatory Course for General Seamanship (FM4-0)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=28860): This preparatory course is specifically directed towards fishing vessel operators and deals with the Canada Shipping Act and pursuant regulations and application of prudent seamanship techniques as it applies to fishing vessels and their crews at sea. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course 200818: Hazardous Materials Awareness](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=29213): To help students recognize the hazards associated with a hazardous materials incident. To enable students to respond to a hazardous materials incident within their limitations of Hazmat Awareness capabilities. To enable students to use relevant Emergency Response Guidebook.
- [Course 703321: Port/Marine Facility Security Officer](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=29293): Those who successfully complete this course should be able to undertake the duties and responsibilities as Port/Marine Facility Security Officer, as defined in section A/2.1.8 (and section A/17) of the ISPS Code, and sections 305 and 306 of the Canadian Marine Transportation Security Regulations, which include: to conduct inspections of the port/marine facility to ensure that appropriate security measures are maintained; to maintain and supervise the implementation of the Port/Marine Facility Security Plan, including any amendments to the plan; to conduct audits of the Port/Marine Facility Security Plan; to propose modifications to the Port/Marine Facility Security Plan; to identify any deficiencies and non-conformities identified during internal audits, periodic reviews, security inspections and verifications of compliance and implement any corrective actions; to ensure security awareness and vigilance at the port/marine facility; to ensure that appropriate security training or orientation is provided to personnel at the port/marine facility; to report all security threats, breaches, and security incidents; to coordinate implementation of the Port/Marine Facility Security Plan with the Company Security Officer and the relevant Ship Security Officer;  to ensure that there is effective communication and cooperation between port/marine facility and the vessels with which it interfaces; to ensure that security drills and exercises are conducted, and; to ensure that security equipment is properly operated, tested, calibrated and maintained, if any.
- [Course 201602: Aircraft Underwater Escape Training](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=31132): To provide participants with the necessary knowledge and skills to effectively teach Marine Institute's Advanced Fire aid training programs. To ensure participants are familiar with Marine Institute's instructor resources, procedures, planning and responsibilities. To provide participants with opportunities to further develop their knowledge and skills of advanced first aid. To ensure participants gain practice and confidence in teaching advanced first aid and gain familiarity with evaluation techniques.
- [Course 200810: Aircraft Rescue and Firefighting - Practical Recertification Live Fire Training](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=54994): ARFF Apparatus Training Live Fire Training
- [Course 200805: Aircraft Rescue and Fire Fighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=54998): To increase the student's knowledge of Aircraft Rescue and Firefighting. To develop the student's familiarity with Aircraft Rescue and Firefighting duties and responsibilities. To enable the student to identify and operate related airport firefighting equipment.
- [Course 201411: Basic Ice Rescue: Train-The-Trainer](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55004): To refresh participants' knowledge of Basic Ice Rescue techniques and procedures. To enhance the instructional abilities of trainers.
- [Course 203406: Basic Defensive Firefighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55018): Enable students to understand the principles of fire behavior. Enable students to operate and use all types of tools, appliances, and protective equipment required for basic defensive firefighting and fire control. Enable students to conduct defensive firefighting operations. Enable students to properly select and effectively operate a portable fire extinguisher. Enable students to draft from and set up a portable water tank.
- [Course 202200: Basic Firefighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55073): To enable students to practice all types of fire behavior situations. To enable students to operate and use all types of tools, appliances, and protective equipment. To enable students to demonstrate all methods of fire control. To enable students to recognize his/her prevention and safety procedures.
- [Course 201410: Basic Ice Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55077): Enable students to assess water and ice conditions as they relate to rescue operations on ice surfaces. Help students understand the problems unprotected victims may encounter in ice-related situations. Provide students with the knowledge and skills to properly select and use personal protective equipment (PPE) for ice rescues. Help students identify the factors, rationale, and influences involved in making a rescue versus recovery decision. Enable students to identify hazards and safety concerns associated with all ice rescue missions. Help students develop the skills to perform a non-entry rescue of an icebound victim while recognizing hazards to rescuers. Help students develop the skills to assist and support ice rescue personnel by tending attached tether lines.
- [Course 200716: Basic Industrial Firefighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55155): Enable the student to better understand fire behaviour and the reasons behind it. Enable the student to identify the advantages and limitations of personal protective equipment (PPE) in an industrial setting. Help the student identify and correctly use industrial fire-related equipment.
- [Course 203407: Basic Offensive Firefighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55272): Enable students to understand advanced principles of fire science and behaviour. Enable students to operate and use all types of tools, appliances, and protective equipment associated with offensive firefighting operations and fire control. Enable students to recognize potential health and safety hazards associated with offensive firefighting operations. Enable students to conduct offensive fire attacks. Enable students to perform ventilation operations for offensive firefighting operations.
- [Course 202025: Confined Space Entry Awareness](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55289): Identify marine confined spaces, related hazards, and applicable safety regulations. Conduct atmospheric testing, monitoring, and equipment calibration. Apply safe entry procedures including hazard assessment, controls, and permits. Select and properly use respiratory protection such as SCBA and SABA. Utilize and inspect safety equipment and PPE for safe entry and rescue.
- [Course 201910: Confined Space Entry](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55299): This course will enable the student: To understand the hazards of confined spaces. To understand the use of gas detection dquipment. To understand purging and ventilating. To understand entry procedures. To identify rescue equipment used in confined space entry and rescue.
- [Course 202018: Confined Space Entry and Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55303): Enable the student to understand the dangers and procedures associated with confined space entry and rescue. Enable the student to operate the different equipment used in confined space entry and rescue.
- [Course 202019: Confined Space Entry and Rescue Refresher](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55307): Review the dangers and procedures associated with confined space entry and rescue. Review and demonstrate competency in using rope and confined space rescue equipment. Be introduced to current practices.
- [Course 201712: Emergency Services Instructor - Level I](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55313): Enable students to identify the obligations of an Emergency Services Instructor to students, the organization, the profession, and themselves. Enable students to conduct proper evaluation, questioning, and presentation techniques for delivering course materials. Enable students to deliver instruction from a prepared lesson plan, including appropriate use of instructional aids and evaluation instruments. Enable students to adapt existing lesson plans to meet the unique needs of a specific organization and its students. Enable students to organize the learning environment to maximize instructional quality and learning opportunities.
- [Course 201709: Emergency Services Instructor - Level II](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55340): Enable the student to meet the job performance requirements of Emergency Services Personnel – Level II as defined by the National Fire Protection Association (NFPA) 1041. Enable the student to develop the skill set required for preparing and presenting training for personnel of Emergency Services Organizations using a variety of methods. Enable the student to manage instructional resources, schedule training sessions, and implement appropriate evaluation techniques. Enable the student to develop instructional materials and evaluation instruments and analyze the results of evaluations to determine test validity.
- [Course 203428: Fall Protection Recertification (WHSCC Approved)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55730): To provide the student with a basic knowledge of Fall Protection systems. To enable students to select, identify, inspect and don a Fall Protection Harness. To familiarize students with basic rescue considerations.
- [Course 200305: Fire Officer - Level I](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55804): Enable students to transition into the role of Company Officer. Enable students to prepare effective written documentation. Enable students to apply logic and ethics in decision-making activities. Enable students to conduct effective interpersonal, oral, and written communications. Enable students to perform records management, pre-incident planning, and incident scene management activities.
- [Course 200306: Fire Officer - Level II](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55830): This course enables students to: Initiate actions to maximize member performance and/or correct unacceptable performance. Evaluate the job performance of assigned members. Develop a policy or procedure. Develop a project or divisional budget. Describe the purchasing process, including soliciting and awarding bids. Prepare a news release. Prepare a concise report for transmittal to a supervisor. Determine the point of origin and preliminary cause of a fire. Produce operational plans. Develop and conduct a post-incident analysis. Analyze a member’s accident, injury, or health exposure history. Create a professional development plan. Explain the benefits of relationships with external agencies. Develop a plan to accomplish organizational change. Develop a written report identifying major causes of service demands across various planning areas.
- [Course 200814: Fire Pumper Driver/Operator](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55890): The student will be able to: Identify all components for a fire apparatus. Explain safe operating procedures for a fire apparatus. Operate and maintain a fire apparatus.
- [Course 200800: Fire Pumper/Operator](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=55958): To enable students to identify all components of a fire pumper. To help students understand the operations of a fire pumper. To enhance students' ability to perform proper care and maintenance of fire pumpers. To help students explain the safety precautions associated with fire pumpers.
- [Course 200813: Firefighter - Level I](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=56030): To enable students to identify all types of fire behavior situations. To enable students to recognize all types of firefighting tools, appliances, and protective equipment. To enable students to recognize the different types of building construction and the methods of fire control. To enable students to evaluate prevention and safety procedures.
- [Course 200817: Firefighter - Level II](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=56173): Enable students to effectively perform fire suppression activities for Class A, structural, hydrocarbon, motor vehicle, and other various types of fires. Enable students to identify and use all types of firefighting tools, appliances, and protective equipment. Enable students to identify and distinguish among the different types of building construction and methods of fire control.
- [Course 200811: Flashover Recognition](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=56203): To enable students to recognize the signs of flashover. To enable students to control or delay a flashover allowing time to escape.
- [Course 202401: Basic Rescue and Rappelling Procedures](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=56295): To help students understand the advantages and limitations of protective equipment. To help students identify and tie the knots used in basic rescue. To provide students with the knowledge to select and use rope related equipment used in basic rescue. To help students perform different basic rescue techniques.
- [Course 705728: Basic Vehicle Extrication](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=58347): Help students understand the need for protective equipment. Enable students to assess an accident scene. Enable students to implement an extrication plan. Enable students to extricate trapped victims. Enable students to operate different types of extrication equipment.
- [Course 200717: Hazardous Incident Identification and Response](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59555): To enable students to identify the hazards associated with a dangerous goods incident. To enable students to respond to a dangerous goods incident. To help students operate the various pieces of equipment associated with a dangerous goods incident.
- [Course 200712: Hazardous Incident Identification and Response - Refresher](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59647): To enable students to identify the hazards associated with a dangerous goods incident. To enable students to respond to a dangerous good incident. To help students operate the various pieces of equipment associated with a dangerous goods incident.
- [Course 202704: Hazardous Materials](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59666): Identification of Dangerous Goods Identification of Operational Hazards Usage of Personal Protective Equipment
- [Course 200815: Hazardous Materials Operations](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59667): To enable students to recognize the hazards associated with hazardous materials goods incidents. To teach students to respond to hazardous materials goods incidents. To enable students to use relevant the Emergency Response Guide book.
- [Course 200825: Hazardous Materials Response (Support Personnel)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59668): Ensure students have a clear understanding of the requirements of a Hazardous Materials Response Team. Enable students to assist a Hazardous Materials Response Team. Provide students with the knowledge to select the appropriate materials and equipment used by a Hazardous Materials Response Team. Enable students to understand and work in conjunction with a Hazardous Materials Response Team Leader.
- [Course 200000: High Angle Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59724): To help students understand the advantages and limitations of protective equipment. To help students develop skill tying the knots used in high angle rescue. To provide students with the knowledge to select and use rope and equipment for high angle rescue. To help students perform different high angle rescue techniques.
- [Course 200002: High Angle Rescue Refresher](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59780): To give participants the opportunity to: Review and demonstrate competency in using rope and high angle rescue equipment. Review and demonstrate competency in various high angle rescue techniques. Be introduced to current practices.
- [Course 200713: Industrial Fire Team](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59878): To enable the student to better understand the behavior of fire and why it behaves as it does. To enable the student to identify the advantages and limitations of personal protective equipment. To help the student to identify and correctly use fre-related equipment. To enable the student to recognize the importance of using the team approach in emergency situations.
- [Course 200823: Interior Live Fire Training](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=59936): To provide students with the knowledge and skills to perform interior fire suppression techniques.
- [Course 202317: Oil Spill Response Awareness](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=60017): To show the student the impact and consequences of marine-related oil spills. To acquaint the student with organizations tasked with response to marine-related oil spills. To enable the student to understand the principles and practices related to oil spills. To train the student in basic oil spill prevention, assessment, protection, containment, clean-up, and recovery strategies.
- [Course 203426: Personal Emergency Descender System (Landbased)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=60057): To enable the student to understand the operating principles of a personal descender system. To enable the student to prepare and don given personal descender equipment and to descend from an elevated platform.
- [Course 201205: SCBA Maintenance and Fit Testing](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=64336): To enable students to properly inspect, maintain and clean a SCBA unit. To enable students to properly Fit Test a SCBA unit.
- [Course 200824: Technical Rescuer (Support Personnel)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=64700): To enable students to assist Technical Rescue Personnel in a rescue situation. To provide students with the knowledge to select the appropriate equipment to be used in a Technical Rescue.
- [Course 201407: Technical Water and Ice Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=64704): To enable students to be efficient and confident to perform water and ice rescue procedures as a member of an emergency response team. To enable students to perform the duties of a supervisor in ice and water rescue procedures.
- [Course 203429: Technical Water Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=64709): To enable participants to be efficient and confident to perform Water Rescue procedures as a member of an Emergency Response Team. To enable participants to perform the duties of a Supervisor in Water Rescue procedures.
- [Course 705729: Aircraft Rescue Firefighting Apparatus Driver/Operator](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=69303): 1.0 Driver/Operator Qualifications 2.0 Types of Fire Apparatus Equipped with a Fire Pump 3.0 Inspection, Maintenance and Testing 4.0 Principles of Safe Vehicle Operation 5.0 Apparatus 6.0 Agent Discharge, Application and Management
- [Course 705730: Anchor Handling I](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=72516): To provide students with the knowledge and skills in planning and risk assessment of anchor handling operations To provide students with practical experience in winch operations, functions and layout. To provide students with practical experience in the use of shark jaws and Karm forks. To provide students with experience in planning, running and retrieving anchors. To practice teamwork and communication skills.
- [Course 705732: Automated Radar Plotting Aid (ARPA)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=79765): 1.0 Radar Plotting Techniques 2.0 Introduction to ARPA 3.0 Acquisition of Targets 4.0 Tracking Capabilities and Limitations 5.0 ARPS Displays 6.0 Target Information 7.0 Interpretation Errors 8.0 Errors in Displayed Data 9.0 System Operational Tests 10.0 Obtaining Information from ARPA Displays 11.0 Over Reliance on ARPA
- [Course PC-705733: Preparatory Course for Ship Management - Level 3 (SM3)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=79782): The purpose of this preparatory course is to provide participants with the knowledge required at the management level as senior Deck Officers and Masters to monitor and control compliance with legislative requirements and measures to ensure safety of life at sea and the protection of the marine environment. This course provides thorough examination of the application of international maritime law embodied into international agreements and conventions, and the national legislations for implementing international agreements and conventions. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705734: Preparatory Course for Ship Management - Level 4 (SM4)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=79783): The purpose of this preparatory course is to provide participants with the knowledge required at the management level as ships Masters to monitor and control compliance with legislative requirements and measures for the carriage of goods by sea, including methods and aids to prevent pollution of the marine environment by ships. This course provides knowledge for the general organization of ship management for the international and national requirements of the carriage of goods by sea and the prevention of pollution of the marine environment. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705735: Preparatory Course for Applied Mechanics for 1st Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=80173): As part of the Transport Canada Certification Preparation Training for 1st Class Engineering  This course is supported by a learning management system called BRIGHTSPACE (formally Desire2Learn  or D2L). This web-based application will allow you to access all your course materials and communicate with your instructor and your classmates.     A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.  
- [Course 203408: Two Day Basic Firefighting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=87121): Students will be able to: Explain the principles of fire behavior. Operate and use all types of tools, appliances, and protective equipment (including SCBA). Conduct effective fire attacks. Select and effectively operate a fire extinguisher. Demonstrate how to properly select and utilize extinguishing agents.
- [Course 201329: Emergency First Aid](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=88746): Introduction and Philosophy of Regulatory Authority (St. John Ambulance/Red Cross) Preparing to Respond Emergency Medical Services System Check, Call, Care Breathing Emergencies Circulation Emergencies First Aid for Respiratory and Cardiac Arrest Airway Emergencies Wound Care
- [Course 201321: CPR Level C Recertification (St John Ambulance or Red Cross)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=114924): This course is designed for the individual who holds a current CPR Level C/AED or HCP/AED certificate and requires annual recertification.
- [Course 200720: Industrial Fire Watch](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=122573): To provide participants with an awareness of the fire hazards associated with industrial sites. To provide participants with an understanding of the roles and responsibilities of persons assigned to Fire Watch activities. To provide training on the use of portable fire extinguishers. To provide training on the application of fire streams in making safe hot work areas.
- [Course PC-705737: Preparatory Course for Navigation Systems and Instruments (NS/I)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=123577): The purpose of this preparatory course is to provide participants with knowledge to recognize the fallibility of electronic aids, and the importance of combining different methods and possessing a continuing ability and preparedness to fall back on basic, non-electronic navigation methods at any time. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course 705740: Naval Architecture for 2nd Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=131465): 1.0 General 2.0 Draught and Buoyancy 3.0 Transverse Stability 4.0 Resistance and Propulsion 5.0 Structural Strength 6.0 Ship Construction 7.0 Ventilation Arrangements 8.0 Tanks Inspection
- [Course PC-705741: Preparatory Course for Ship Construction and Stability, Level 5 (SCS 5)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=132248): This advanced level preparatory course links stability theory with practical applications The purpose of this course is to provide the participant with an in depth understanding of fundamental principles of ship construction and theories and factors affecting trim and stability and measures necessary to preserve trim and stability. The course also provides knowledge for the application of stability and trim diagrams and stress-calculating equipment, and knowledge of loading cargoes and ballasting in order to keep stresses within acceptable limits. The course further examines the effects and trim and stability in damaged conditions and the recommendations of the International Maritime Organization (IMO), concerning ship stability. The examination must be written with Transport Canada.
- [Course PC-705742: Preparatory Course for Engineering Knowledge, Level 2 (EK 2)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=132317): This advanced level preparatory course provides marine engineering knowledge so that senior deck officers acquire operational knowledge of remote controls of propulsion plants, engineering systems and services.  This course thoroughly examines operating principles of marine power plants, ship’s auxiliary machinery, and general knowledge of marine engineering. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705743: Preparatory Course for Engineering Knowledge General 1st Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=137857): As part of the Transport Canada Certification Preparation Training for 1st Class Engineering. Examination to be written at Transport Canada. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705744: Preparatory Course for Engineering Knowledge Motor 1st Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=137874): As part of the Transport Canada Certification Preparation Training for 1st Class Engineering. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705745: Preparatory Course for Naval Architecture for 1st Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=138618): This course is intended to prepare students for the Transport Canada 1NAR exam, which will test their theoretical knowledge of Naval Architecture. Students who completed this course will have the knowledge of ship geometry, transverse and longitudinal static stability and ship’s structural components. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705746: Preparatory Course for Engineering Knowledge Motor 2nd Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=142105): As part of the Transport Canada Certification Preparation Training for 2 nd Class Engineering. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705747: Preparatory Course for Engineering Knowledge Motor 3rd Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=142127): As part of the Transport Canada Certification Preparation Training for 3rd Class Engineering. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705748: Preparatory Course for Engineering Knowledge General 2nd Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=142462): As part of the Transport Canada Certification Preparation Training for 2nd Class Engineering.  A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705749: Preparatory Course for Engineering Knowledge General 3rd Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=142463): As part of the Transport Canada Certification Preparation Training for 3rd Class Engineering. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course 202013: Confined Space Entry Awareness](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=152857): Enhance the ability of participants to ensure their own safety through knowledge of the issues surrounding entry into marine confined spaces. Familiarize participants with a selection of specialized safety equipment used to mitigate risk to marine confined space entrants.
- [Course PC-705750: Preparatory Course for General Seamanship Orals: (CM-O)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=169722): The purpose of this preparatory course is to prepare participants to demonstrate the ability to apply the knowledge detailed in the oral examination syllabus for the Chief Mate certificate, contained in “TP2293 – The Examination and Certification of Seafarers”.  Candidates for Chief Mate certification should demonstrate the ability to apply the knowledge outlined in this oral examination syllabus by appropriate responses, anticipations and reactions to a range of routine, non-routine and contingency scenarios as presented by the examiner, from the perspective of the duties and responsibilities associated to the validity of the Chief Mate certificate. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705751: Preparatory Course for General Seamanship WKM Orals: (OOW-O)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=169820): The purpose of this preparatory course is to prepare participants to demonstrate the ability to apply the knowledge detailed in the oral examination syllabus for the Watchkeeping Mate certificate, contained in “TP2293 – The Examination and Certification of Seafarers”.  Candidates for Watchkeeping Mate certification should demonstrate the ability to apply the knowledge outlined in this oral examination syllabus by appropriate responses, anticipations and reactions to a range of routine, non-routine and contingency scenarios as presented by the examiner, from the perspective of the duties and responsibilities associated to the validity of the Watchkeeping Mate certificate. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course 705753: Ship Boarding and Cold Water Survival](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=238224): To give participants a basic understanding of Personal Buoyancy Apparatus and water safety. To give participants a basic understanding of Gangway and Ladder Safety. To provide participants with the knowledge and skill of cold water safety and survival. To provide participants with the knowledge and skills necessary to achieve self-rescue in accidental immersion situations
- [Course 705754: Dynamic Positioning Familiarization (2.5 day)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=249406): This course will enable the student to: Acquire knowledge of the principles of DP. Set up a Dynamic Positioning system. Understanding of the practical operation of associated equipment, including position reference systems. Recognize and respond to the various alarm, warning and information messages. Relate the Dynamic Positioning installation to the ship system, including (but not limited to): power supply, manoeuvring facility, available position reference systems and nature of work. Relate Dynamic Positioning operations to the existing environmental conditions of wind, sea state, current/tidal stream and vessel movement.
- [Course 201333: Advanced Medical Responder Level II](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=285021): Roles and Responsibilities Well Being of the Emergency Responder Patient Assessment Respiratory Emergencies Supplementary Oxygen Cardiovascular Emergencies Trauma Medical Conditions Musculoskeletal Injuries Environmental Emergencies Special Populations
- [Course 705758: Salmonid Rearing - Recirculation Re-Use and Flow-Through](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=331155): To enable course participants to: Become familiar with the structure and operation of recirculating, re-use, and flow-through systems within an aquaculture facility Gain exposure to the daily and weekly activities necessary to maintain fish in recirculating and flow-through aquaculture facilities Carry out critical calculations required to successfully operate an aquaculture facility
- [Course PC-705759: Preparatory Course for Electrotechnology for 1st Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=375268): As part of the Transport Canada Certification Preparation Training for 1st Class Engineering this course will be offered online through Memorial University's Distance Learning site during our 2019/2020 academic year.  A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705760: Preparatory Course for Electrotechnology for 2nd Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=375269): As part of the Transport Canada Certification Preparation training for 2 nd Class Engineering this course is supported by a learning management system called BRIGHTSPACE (formally Desire2Learn  or D2L). This web-based application will allow you to access all your course materials and communicate with your instructor and your classmates.  A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705762: Preparatory Course for Math and Applied Mechanics for 3rd Class Engineers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=375324): As part of the Transport Canada Certification Preparation Training for 3 rd Class Engineering t his course is supported by a learning management system called BRIGHTSPACE (formally Desire2Learn  or D2L). This web-based application will allow you to access all your course materials and communicate with your instructor and your classmates.  The examination must be written with Transport Canada.  
- [Course 705763: Land Transportation Emergency Response](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=393379): 1.0 Generic Product Identification System 2.0 Transportation of Dangerous Goods Requirements 3.0 Driver Spill Response Awareness 4.0 Driver Spill Response Priorities 5.0 Tank Truck Roll-Over Exercise
- [Course PC-705764: Preparatory Course for Math Refresher Course](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=402653): This course consists of a review of basic mathematical topics. It is designed to allow students to review, demonstrate and increase their understanding of basic mathematical concepts. The goal is to increase a student’s mathematical skills in preparation for examinations in other Engineering related courses and programs. This course is supported by a learning management system called BRIGHTSPACE (formally Desire2Learn  or D2L). This web-based application will allow you to access all your course materials and communicate with your instructor and your classmates.
- [Course 705765: Security Awareness Training for Port Facility Personnel](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=404850): Those who successfully complete this course should achieve the required standard of competence outlined in Section 308 of the Canadian MTSR and the ISPS Code, thereby contributing to the enhancement of maritime security through heightened awareness, recognition of security threats and appropriate responses. This knowledge shall include but is not limited to: The meaning and the consequential requirements of the different security levels; Knowledge of emergency procedures and contingency plans; Recognition and detection of weapons, dangerous substances, and devices; Recognition, on a non-discriminatory basis, of characteristics and behavioral patterns of person who are likely to threaten security; and Techniques used to circumvent security measures.
- [Course 705766: Continuing Proficiency in Lifeboat Launching and Operation for Offshore Petroleum Installation Lifeboat Coxswain (1 day)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=437018): The aim of the course is to provide Offshore Lifeboat Coxswains the opportunity to practice certain elements of their role which they cannot reasonably practice offshore.
- [Course 202320: Continuing Proficiency in Offshore Petroleum Installation Lifeboat Coxswain including Rescue Boats (Husky Specific)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=456318): To review selected knowledge required for lifeboat operation To provide students with the opportunity to develop and/or refresh skill in the use of lifeboats and rescue boats and their associated launching systems
- [Course 705767: Refresher Training Course in STCW Basic Safety, in Proficiency in Survival Craft and Rescue Boats, Other than Fast Rescue Boats, and in Advanced Fire Fighting (MED REF)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=456490): This refresher training course is designed to comply with the current STCW Conventions and to refresh the seafarers' skills in basic emergency duties through demonstrations and practical drills and exercises.
- [Course 705768: Refresher Training Course in STCW Basic Safety and in Proficiency in Survival Craft and Rescue Boats other than Fast Rescue Boats (MED REF)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=456495): This refresher training course is designed to comply with the current STCW Convention and to refresh the seafarers' skills in basic emergency duties through demonstrations and practical drills and exercises.
- [Course PC-705769: Preparatory Course for Technical Drawing for 2nd Class Engineers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=458355): As part of the Transport Canada Certification Preparation Training for 2nd Class Engineering. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705770: Preparatory Course for Thermodynamics for 1st Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=508057): As part of the Transport Canada Certification Preparation Training for 1st Class Engineering. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course PC-705771: Preparatory Course for Thermodynamics for 2nd Class Engineering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=508058): This preparatory course, intended to prepare students for the Transport Canada 2nd Class Engineering exam, will test their theoretical knowledge of thermodynamics. It provides the student with the knowledge of thermal properties, the gas law, heat transfer principles and thermal relations such as the indicator diagram and fuel consumption.
- [Course 705773: Introduction to Ice Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=513855): To enable the student to: Assess water and ice conditions as they relate to rescue operations on ice surfaces. Understand the problems unprotected victims may encounter in ice related situations. Properly select personal protective equipment available to rescuers in ice-related situations. Identify the factors, rationale and influences leading to a rescue versus recovery decision. Identify hazards and safety concerns for all ice rescue missions.  
- [Course PC-705774: Preparatory Course for General Seamanship Master Mariner Orals: (MM-O)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=519144): The purpose of this course is to prepare participants to demonstrate the ability to apply the knowledge detailed in the oral examination syllabus for the Master Mariner certificate, contained in “TP2293 – The Examination and Certification of Seafarers”. Candidates for Master Mariner certification should demonstrate the ability to apply the knowledge outlined in this oral examination syllabus by appropriate responses, anticipations and reactions to a range of routine, non-routine and contingency scenarios as presented by the examiner, from the perspective of the duties and responsibilities associated to the validity of the Master Mariner certificate. A preparatory course does not replace the official Transport Canada exams; rather, it supports your learning, helps you understand the required subject matter, and prepares you to meet Transport Canada’s standards and expectations. Please note that the official certification examination must still be written directly with Transport Canada.
- [Course 705776: Ice Safety and Survival](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=570207): This course enables the student to: Assess water and ice conditions as they relate to activities on ice surfaces. Understand the problems unprotected victims may encounter in ice-related situations. Properly select and use available personal protective equipment (PPE). Identify the factors, rationale, and influences involved in making a rescue versus recovery decision. Identify hazards and safety concerns during ice operations. Develop skills for performing a non-entry rescue of an icebound victim while recognizing hazards to rescuers. Develop skills to assist and support ice rescue personnel by tending attached tether lines. Develop skills through observation of both self and assisted rescues.
- [Course 202206: Advanced Medical First Responder Level I](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=620133): Preparing to Respond Establishing Priorities of Care Traumatic Injuries Medical Emergencies Special Populations and Situations
- [Course 705777: Refresher Training Course in Proficiency in Fast Rescue Boats](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=621325): To enable course participants to acquire knowledge, understanding and proficiency in: Particular characteristics and facilities of fast rescue boats Safety precautions during launch and recovery of a fast rescue boat Maneuvering a fast rescue boat Towing Righting a capsized fast rescue boat Navigational and safety equipment available in a fast rescue boat Search patterns and rescue
- [Course 705778: Factory Freezer Trawler Factory Manager Workshop](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=662438): To enable course participants to develop knowledge and basic management skills regarding: Regulatory requirements related to personal hygiene, food safety, product quality, product standards, construction and equipment, and documentation and record keeping. Onboard processing operations on factory freezer trawlers, including the effective use of crew members, maximizing factory efficiency, troubleshooting quality and throughput issues, and completing product inspections.
- [Course 200003: Tower Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=676472): Personal Protective Equipment Rope and Knots High Angle Rescue Equipment Rappelling and Belaying Patient Access and Rescue
- [Course 101109: Quartermaster Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=688051): The student will be able to: Apply bridge resource management concepts and procedures as related to the duties of a Quartermaster Receive and respond to standard helm orders when steering the ship using a closed-loop communication model Demonstrate the appropriate confidence level for a Quartermaster and provide appropriate navigation support for other members of the bridge team
- [Course 200610: Basic Survival Training Recurrent (BST-R)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=688054): To provide participants with updated knowledge, skill, and proficiency regarding: Hazards associated with the marine environment, offshore petroleum installations, and helicopters Alarms and emergency response procedures on board offshore petroleum installations and helicopters Survival and rescue equipment and procedures on board offshore petroleum installations and helicopters
- [Course 200609: Basic Survival Training](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=694654): To give students a basic understanding of the hazards associated with the marine environment, offshore petroleum installations, and helicopters. To provide students with the knowledge necessary to react to alarms and emergencies on board offshore petroleum installations and helicopters. To provide students with the knowledge and skills required to assist in emergency, survival, and rescue scenarios.
- [Course 705780: International Survey Trawl](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=695076): To enable participants to develop an understanding of: Survey trawl standardization Survey trawl engineering Survey trawl hydrodynamics Survey trawl performance Fish behavior during the fish capture Manufacturer variability Survey trawl reference manuals Practical quality control exercises
- [Course 705781: Refresher Training Course MED with respect to STCW Basic Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=695444): To enable course participants to maintain required standards of competence in the practical aspects of basic safety and firefighting. 
- [Course 705783: Propulsion Plant Simulator, Level 2 Ship Management Practices](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=773962): The student will be able to: List the machinery and associated systems and equipment which form the simulated plant. Describe and list the instrumentation used in the simulated plant for measurement. State how and where the machinery units forming the plant can be controlled. State how safe practices must always be used when preparing machinery units and associated systems for startup and operation. Observe and apply safe practices in all exercises. Prepare, start up and run the diesel electric generators. Prepare and raise steam to normal working pressure. Prepare, start and run the steam cargo turbines. Apply preparation procedures for the main propulsion engine. Prepare, start and run the main propulsion units and associated systems. Locate and apply remedial action for malfunctions or faults. Employ Power Plant and Resource Management Practices at the senior officer level
- [Course 705784: Sea-based Salmonid Farm Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=783590): To enable the student to gain a broader, more complete understanding of: Various farm inputs and outputs that are the responsibility of the farm manager The scope of the farm manager's role in farm operations Various tools that can be used to assist in farm management activities
- [Course 705785: Aquaculture Human Resource Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=783591): To enable the participant to: Have an introduction to the key elements and activities of the human resources function of an aquaculture operation Examine the competencies required by those who are responsible for understanding and managing people in the workplace Develop or enhance their human resource management skills
- [Course 705786: Calculations in Aquaculture](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=783798): To enable the student to: Review mathematical fundamentals. Identify appropriate equations for specific aquaculture scenarios. Practice solving mathematical equations within the aquaculture context.
- [Course 705787: External Communications for Aquaculture Farm Managers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=783809): To enable the student to gain a broader, more complete understanding of the: Role of communications within the aquaculture farm setting. Role of the farm manager in public and media relations. Use of social media in external communications.
- [Course 705788: Aquaculture Project Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=783820): To enable the participant to: Become familiar with the fundamentals of project management Develop an understanding of the key elements of project success Develop an understanding of the strategic elements of a project
- [Course 705789: Computer Skills](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=783841): To enable the student to: Develop file management skills. Be introduced to various software packages applicable to the work environment. Enhance word processing, presentation, and spreadsheet software applications skills.
- [Course 705790: Salmonid Aquaculture Regulation and Policy](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=783842): To enable the student to gain a broader, more complete understanding of their responsibilities with respect to protecting: Their stock, wild fish, and the broader environment The public from harm caused by the farmed products or farming operations Site workers from harm
- [Course 705791: Advanced Training for Oil Tanker Cargo Operations](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=851365): During the course, participants will gain: Familiarization with the equipment, instrumentation and controls used for cargo handling on an oil tanker Greater awareness of the need of proper planning, the use of checklists and the time scales involved in the various cargo handling operations Greater awareness to apply proper and safe procedures at all times when carrying out the various operations on board an oil tanker Experience in identifying operational problems and solving them. An ability to promote safety and protect the marine environment An ability to assist and co-ordinate actions during emergencies
- [Course 705792: Ship Maneuvering for Offshore Vessels (5-day)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=886011): To provide students with the knowledge and skills in planning and risk assessment of offshore ship maneuvering. To provide students with practical experience in maneuvering an offshore vessel during machinery failures and changing environmental conditions. To provide students with experience in planning and executing offshore operations. To practice teamwork and communication skills.
- [Course 705793: Ship Maneuvering for Offshore Vessels with Azimuthing Propulsion (5 day)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=886016): Provide students with knowledge and skills in planning and risk assessment of offshore ship maneuvering, specifically for vessels equipped with azimuthing propulsion. Offer practical experience in maneuvering offshore vessels with azimuthing propulsion during machinery failures and changing environmental conditions. Provide experience in planning and executing offshore operations. Practice teamwork and communication skills.
- [Course 705794: Small Non-pleasure Domestic Vessel Basic Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=900541): To enable course participants to: Develop a basic understanding of the hazards related to the marine environment and their own vessel. Understand how to prevent shipboard incidents, including fire. Gain the knowledge needed to raise and respond to alarms and deal with emergencies. Acquire the ability to provide assistance in fire and abandonment situations. Develop the knowledge and skills necessary for personal survival and rescue.
- [Course 705795: Emergency Management for Hebron Platform/Flotilla During HUC Activities at the Deep Water Site](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=913243): To familiarize participants with site plans to address emergencies at the Bull Arm DWS. To familiarize participants with individual roles and responsibilities in the event of an emergency at the DWS. To exercise the various assigned emergency response roles through participation in a relevant tabletop exercise.
- [Course 200819: Technical Rescuer (Vehicle Rescue Awareness Level, Operations Level, and Technician Level)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=987364): To help students recognize the need for a vehicle search and rescue. To help students in identifying recourses necessary to conduct vehicle operations. To enable students to initiate the emergency response systems for vehicle search and rescue incidents. To enable students to initiate site control and scene management. To enable students to recognize general hazards associated with vehicle search and rescue incidents. To enable students to initiate traffic control.
- [Course 705797: Ship Maneuvering for Offshore Vessels (3-day)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=989328): Provide students with knowledge and skills in planning and risk assessment of offshore ship maneuvering. Offer practical experience in maneuvering an offshore vessel during machinery failures and changing environmental conditions. Provide experience in planning and executing offshore operations. Develop teamwork and communication skills.
- [Course 705798: Refresher Training in MED with respect to Proficiency in Survival Craft and Rescue Boats other than Fast Rescue Boats](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1049599): To enable the students to: Refresh skills in basic emergency duties through demonstrations and practical drills and exercises Safely launch, operate and recover lifeboats Safely launch, operate and recover rescue boats Safely launch and operate inflatable and rigid hulled life rafts Correctly identify and use survival craft equipment Manage marine survival Manage marine rescue
- [Course 705799: RADAR and ARPA for Ice Observers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1058430): This course will develop the student's ability: To plot positions of targets on a chart and to obtain range and bearing of the targets as well as course and speed. To understand function and operation of RADAR and ARPA. To use RADAR to obtain range and bearing and to plot these on a chart to obtain Latitude and Longitude. To use ARPA to obtain range and bearing as well as course and speed of targets. To understand the function and operation of the Rutter Sigma 6 Ice RADAR To help the Radar Ice Observer obtain relevant information and to identify that could be encountered along the East Coast of Newfoundland and Labrador To help Radar Ice Observer understand the basic techniques, hazards, and precautions necessary for safe transits of vessels in ice To ensure the Radar lee Observer understand the importance of standard watchkeeping practices in a marine environment
- [Course 705801: Industrial Fire Watch (2 Day)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1104067): To provide the student with an awareness of the fire hazards associated with industrial sites. To help the student to become familiar with the use of portable fire extinguishers and hand lines.
- [Course 202903: Basic Spill Response Training](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1130244): Hazardous Materials Personnel Protective Clothing and Equipment Spill Containment and Clean Up Rescue and Decontamination Operations
- [Course 705802: Cod Grade Standard Assessment Workshop](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1139527): 1.0 Cod Grade Standard 2.0 Random Sampling 3.0 Sample Assessment 4.0 Documentation and Record Keeping
- [Course 705805: Major Emergency Management - Assessment](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1230478): To enable the student to: Command, control, and communicate in stress-related simulated emergency situations, ensuring a positive conclusion is attained in a safe and practical manner.
- [Course 705806: Major Emergency Management - Initial Response](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1230489): To enable students to: Manage, coordinate and use available resources to respond effectively to emergency situations that impact or have the potential to impact their organization. Employ command, control, and communications techniques in stress-related simulated emergency situations.
- [Course 705807: Marine Emergency Duties - Domestic Vessel Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1265222): This course will: Provide seafarers with basic understanding of the hazards related to the marine environment and their own vessel, and of how to prevent shipboard incidents including fire Provide seafarers with the knowledge they need to raise and react to alarms and deal with emergencies Ensure seafarers are able to provide assistance in fire and abandonment situations Provide seafarers with the knowledge and skills to help in their own survival and rescue Teach seafarers the proper procedures for maintaining emergency equipment according to manufacturer guidelines Provide seafarers with the knowledge to maintain the appropriate record-keeping procedures for safety equipment Ensure that crew members of passenger vessels have the knowledge and skills necessary to keep passengers safe and help them survive an emergency Enable crew members of passenger vessels to plan, organize and carry out safety drills so the passengers will be aware of safety equipment and procedures.
- [Course 705809: Leadership and Managerial Skills](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1294898): To enable course participants to: Effectively manage shipboard personnel and their training Effectively manage workload, stress, and fatigue Effectively manage resources Carry out effective decision-making
- [Course 705810: Survival Craft Coxswain](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1322773): To provide students with a working knowledge of lifeboats and their associated launching systems. To provide students with the opportunity to develop practical skills in the use of lifeboats and their associated launching systems.
- [Course 705811: Crew Resource Management (CRM) - MV Asterix](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1340296): To enable students to: Effectively manage risk onboard this specific vessel "MV Asterix". Effectively manage shipboard personnel. Effectively manage workload, stress and fatigue in this complex and unique environment. Effectively manage all resources available to them onboard the vessel MV Asterix. Carry out effective decision making. Bridge gaps identified between civilian and naval operations.
- [Course 705812: Cod Processing Workshop](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1368442): This course aims to enable workshop participants to gain the knowledge and develop the skills necessary to safely trim cod fillets or split and/or fillet cod fish manually. Participants will be able to: • Briefly discuss personal hygiene requirements as outlines by CFIA's (Canadian Food Inspection Agency) Fish Inspection Regulations. • Outline a basic understanding of the skeleton structure as it relates to the potential location of defects. • Apply proper knife handling skills and safe handling practices. • Apply and demonstrate best practices in the trimming of cod fillets or the manual filleting and/or splitting of cod.
- [Course 705816: introduction to Offshore Supply, Support and Specialized Vessel Operations](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1657298): To provide students with the knowledge and skills necessary to work safely and effectively onboard on offshore supply vessel. To provide students with a general knowledge of offshore operations. To provide students with a knowledge of offshore terminology procedures.
- [Course 705818: Ship Handling for Offshore Vessels with Azimuthing Propulsion - 3 day](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1747232): This course allows participants: The knowledge and skills in planning and risk assessment of offshore ship maneuvering specific to vessels equipped with azimuthing propulsion Practical experience in maneuvering vessels with azimuthing propulsion during machinery failures and changing environmental conditions Experience in planning and executing offshore operations Practice teamwork and communication skills
- [Course 705819: Survival Craft Coxswain - Recurrent](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1752864): To provide students with a working knowledge of lifeboats and their associated launching systems. To provide students with the opportunity to develop practical skills in the use of lifeboats and their associated launching systems.
- [Course 705820: Incipient Industrial Fire Team Member](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1756740): Fire Behaviour Portable and Semi-Portable Extinguishers Personal Protection Equipment Firefighting Equipment and Techniques Fire Protection and Suppression Systems Emergency Response Planning
- [Course 705821: Leadership and Teamwork](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1768345): On completion of the course the student will be able to: demonstrate sufficient understanding and knowledge of leadership and team working. have knowledge of related international maritime conventions, recommendations and national legislation. apply task and workload management have knowledge and ability to apply effective resource management. have knowledge and ability to apply decision making techniques apply elements of leadership and teamwork in a simulated environment
- [Course 705822: Advanced Exterior Industrial Fire Team Member](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1769695): To enable students to better understand the behavior of fire and why it behaves in a particular manner. To enable students to better identify the advantages and limitations of personal protective equipment. To help the students to develop appropriate fire attack strategies for exterior firefighting. To provide students with the knowledge of BLEVES. To provide students with the knowledge of firefighting foam. To enable the students to focus on the team approach in emergency situations. To provide students with a better understanding of an incident management system during an emergency situation. To provide students with a better understanding of the standard operating procedures during an emergency situation. To provide students with the ability to safely perform advanced exterior firefighting.
- [Course 705823: Basic Training for Ships Operating in Polar Waters (Meeting the guidelines of IMO's Model Course HTW 4/WP.6 Annex 1 and the IMO Polar Code MEPC 68/21/Add 1 Annex 10)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1771606): To enable course participants to: Contribute to safe operation of vessels operating in polar waters;  Demonstrate awareness to monitor and ensure compliance with legislative requirements; Develop an understanding of the application of safe working practices, respond to emergencies; Develop an understanding of the need to ensure compliance with pollution- prevention requirements and prevent environmental hazards; and Develop an understanding of skills to perform maneuver in order to safely operate ships in polar waters.
- [Course 705824: Advanced Training for Ships Operating in Polar Waters](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1771613): To enable course participants to: Develop an understanding of the basic requirements for structure, stability and subdivision, machinery, life-saving appliances, fire protection, voyage planning, ship routing, navigation systems and equipment, radio communication, pollution prevention equipment, liability and safety management systems, as applicable to the different types and sizes of ships which may undertake voyages in polar waters. Develop an understanding of ice characteristics and areas where different types of ice can be expected in the area of operation. Develop an understanding of vessel performance in ice and low air temperature.  Develop an understanding of safe operations and ship manoeuvrability in ice. Develop an awareness of the need to monitor and ensure compliance with legislative requirements.  Develop an understanding of the application of safe working practices and to respond to emergencies.  Develop an understanding of the need for correct crew preparation, working conditions and safety,  Develop an understanding of the need to ensure compliance with pollution- prevention requirements and prevent environmental hazards.  Develop an understanding of the skills to perform maneuver in order to safely operate ships in polar waters
- [Course 705825: Proficiency in Survival Craft and Rescue Boats other than Fast Rescue Boats](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1773515): To enable course participants to learn about, understand and become proficient in: construction and outfit of survival craft and rescue boats and individual items of their equipment; particular characteristics and facilities of survival craft and rescue boats; various types of devices used to launch survival craft and rescue boats; methods of launching survival craft into a rough sea; methods of recovering survival craft; actions to take after leaving the ship; methods of launching and recovering rescue boats in a rough sea; handling survival craft in rough weather; how to use painter, sea anchor and all other equipment; how to apportion food and water in survival craft; action to take to maximize detectability and location of survival craft; method of helicopter rescue; effects of hypothermia and its prevention, use of protective covers and garments, including immersion suits and thermal protective aids; use of rescue boats and motor lifeboats for marshalling liferents and rescue of survivors and persons in the sea; beaching survival craft; methods of starting and operating a survival craft engine and its accessories together with how to use the fire extinguisher provided; radio lifesaving appliances carried in survival craft, including satellite EPIRBs and SARTs; pyrotechnic distress signals; how to use first-aid and resuscitation techniques; managing injured persons, including how to control bleeding and shock.
- [Course 705827: Fish Habitat Awareness for the Marine Environment Seminar](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1819447): This seminar will enable participants to: Develop an understanding of fish and fish habitat in the marine environment; and Reduce impacts to fish habitat at the planning and design stage of a development or project.
- [Course 705828: International Safety Management Code](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1832394): This course will provide participants with: An understanding of the relationship between quality systems and ISM. A basic knowledge of ISM code requirements. An understanding of the auditing process. The ability to identify documents used in conjunction with the ISM code.
- [Course 705829: Char Net Construction and Repair](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1899082): This course will develop the participants' ability to: Understand the fundamental principles of char net mending and repair. Demonstrate basic techniques for mending and repairing char nets. Discuss the basic construction and design of char nets.
- [Course 705831: Marine Personnel Transfer Operations](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1947871): To provide students with the knowledge to be able to: Examine pilot ladder construction and condition and evaluate whether or not it is safe to use Identify hazards associated with climbing a pilot rope ladder, accommodation ladder and a basket transfer Understand the safe procedure for being transferred on a basket transfer Know when it is, and is not, safe to undertake a marine transfer and the effective use of STOP Understand and be resilient to peer and client pressure Apply basic sea survival techniques Prepare for practical field training
- [Course 705832: Confined Space Entry (WSCC)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1947872): Enable students to recognize a confined space environment. Enable students to identify and control hazards in a confined space environment. Provide students with basic knowledge of a confined space work permit system. Provide students with basic knowledge of reporting confined space accidents/incidents. Familiarize students with basic confined space rescue planning.
- [Course 705835: Fall Protection (WSCC)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1952421): Provide the student with basic knowledge of Fall Protection and Fall Arrest Systems. Enable students to select, inspect, assemble, don, and use Fall Arrest Equipment. Provide students with basic knowledge of a Fall Protection Plan. Familiarize students with basic knowledge of reporting accidents/incidents. Familiarize students with basic rescue considerations.
- [Course 705836: Emergency Underwater Breathing Apparatus (EUBA)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=1999926): Rationale for Emergency Underwater Breathing Apparatus  (EUBA) Hazards and Limitations for Emergency Underwater Breathing  Apparatus (EUBA) Emergency Underwater Breathing Apparatus (EUBA
- [Course 705837: Helicopter Passenger Transportation and Emergency Procedures including HUET](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2011266): This course will develop the student’s ability to: Embark, travel, and disembark, helicopters. React effectively to helicopter emergencies. Use effectively personal and helicopter emergency equipment
- [Course 705838: Portable Extinguisher Training](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2053719): This is a basic level course designed to enable the participants to understand and to demonstrate the practical use of portable fire extinguishers. It will enable participants to: 1. select a portable fire extinguisher 2. use a portable fire extinguisher
- [Course 705843: Factory Manager Workshop (Factory Freezer Trawler)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2228668): To enable course participants to develop knowledge and basic management skills regarding: Regulatory requirements related to personal hygiene, food safety, product quality, products standards, construction and equipment, and documentation and record keeping. Processing onboard factory freezer trawlers including the effective use of crew members, maximizing factory efficiency, troubleshooting quality or through-put issues, completing product inspections, and completing documentation and record keeping.
- [Course 705845: Defensive Industrial Fire Team Member (NALCOR)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2269539): 1.0 Fire Behavior 2.0 Portable and Semi-Portable Extinguishers 3.0 Personal Protection Equipment 4.0 Firefighting Equipment and Techniques 5.0 Exterior Firefighting 6.0 Firefighting Foam 7.0 Communication and Emergency Response.
- [Course 705846: Mobile Offshore Units (MOU) Meteorology Familiarization](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2272712): This course will enable the student to: Understand the characteristics of weather systems. Apply meteorological information in relation to the safety of the MOU. Supply weather observations to other vessels or aircraft. Discuss sources of Meteorological information. Discuss the effect of weather on the environmental limits of the MOU.
- [Course 705849: Seafood Processing for Employees](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2323699): To enable course participants to develop basic knowledge regarding: Basic microbiology and the importance of performing proper sanitation and hygiene practices Regulatory requirements surrounding seafood processing
- [Course 203409: Fire Marshall](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2326879): 1.0 Roles and Responsibilities 2.0 Fire Science and Behaviour 3.0 Fire Extinguishers 4.0 Standpipe Systems
- [Course 705851: Workplace Hazardous Materials Information Systems 2015 (WHMIS 2015)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2363427): This course will develop the student’s ability to use the WHMIS system.
- [Course 705852: International Training Course in Trawl Technology](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2537400): To enable the student to: Identify the parts of a trawl Understand basic trawl designs and rigging Understand basic methods of bycatch reduction Discuss types of ecological impacts of trawling Discuss knowledge needs and best practices
- [Course 705853: Salmonid Cage and Site Maintenance](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2626101): This course will familiarize the participant with the: Design and construction of salmonid aquaculture cage systems Maintenance procedures associated with salmonid aquaculture cage systems
- [Course 202315: HUET Diver](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2674166): This course will develop the participants’ ability to: Recognize and respond to HUET training emergency situations. Understand their role in the training and safety of HUET course participants.
- [Course 705854: Emergency Towing Operations I](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2676972): Provide students with the knowledge and skills to plan and develop a risk assessment for emergency towing operations. Provide students with knowledge of winch operations, functions, and layout. Provide students with knowledge of the use of shark jaws, Karm forks, and deck equipment. Provide students with experience in planning and completing towing operations. Practice teamwork and communication skills.
- [Course 705855: Emergency Towing Operations II](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2717463): Provide students with the opportunity to develop and carry out, in a simulated environment, the communications and operations required to address an emergency towing situation. Provide students with the opportunity to practice ship handling skills required during emergency towing operations. Provide students with an opportunity to practice teamwork and leadership skills.
- [Course PC-705857: Preparatory Course for Applied Mechanics (2nd Class)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2824338): To provide students with a working knowledge of mechanics and the application of mechanics to physical systems found onboard a vessel.
- [Course 705858: Interior Structural Industrial Fire Team Member](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=2999797): To interpret and appraise the characteristics of an interior structure fire. To examine the differences between rollover, flashover and backdraft. To identify the principles of thermal layering within a structure. To identify and describe building components and their relationship to fire suppression. To demonstrate forcible entry into a structure. To explain each way ventilation can be achieved and the advantages and limitations of each. To demonstrate ventilation techniques with selected tools and environments. To apply the strategies on how to attack an interior structure fire.
- [Course 705859: Shore Based Response to Shipboard Fires](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=3008136): To enable students to safely and efficiently extinguish vessel fires. To enable students to construct and execute a contingency plan for ship boarding and firefighting. To enable students to gain a better understanding of various components for shipboard operations in the event of an emergency. To explain to students the negative effects of pumping large amounts of water on a vessel. To discuss the hierarchy and overall command structure on a vessel
- [Course 705861: High Voltage Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=3156455): To improve the knowledge and safety of electro-technical officers and marine engineers working on vessels that employ high voltage systems To meet the STCW requirements for high voltage training
- [Course 705865: Dynamic Positioning - DPO Preparation](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=3486792): At the end of the course the student should: Have acquired knowledge of the principles of DP. Be able to set up a DP system. Have an understanding of the practical operation of associated equipment, including position reference systems. Be able to recognize and respond to the various alarm, warning and information messages. Be able to relate the DP installation to the ship system, including (but not limited to); power supply, maneuvering facility, available position reference systems and nature of work. Be able to relate DP operations to the existing environmental conditions of wind, sea state, current/tidal stream and vessel movement. Have an understanding of a DNV GL approved DP Operator's training scheme, including the requirements for completion of the task book and the procedure for obtaining a DP certificate.
- [Course 705866: Dynamic Positioning - DPO Start](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=3486796): At the end of the course the student should: Have a thorough knowledge of the practical aspects of a variety of DP operations. Have the capability to plan and conduct DP operations, including risk assessment, contingency planning and assessment of vessel capability. Be able to carry out effective communications. Have the ability to undertake DP operations with due regard to all circumstances of seamanship and operational requirements. Have the ability to react correctly to any circumstances which constitute or could lead to a catastrophic failure. Be able to practice effective teamwork. Have acquired a knowledge of unwanted DP incidents
- [Course 705867: Introduction to Offshore Supply, and Support for Cargo Operations](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=3738852): To provide students with the knowledge and skills necessary to work safely and effectively onboard an Offshore Supply Vessel completing cargo operations To provide students with a knowledge of offshore cargo terminology and procedures
- [Course 705868: Technical Rescuer (Confined Space Awareness Level, Operations Level, Technician Level)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4001007): Awareness : Enable students to recognize a confined space and understand the need for confined space search and rescue. Enable students to initiate contact and establish communications where possible. Enable students to recognize and identify the hazards associated with non-entry confined space emergencies and perform a non-entry rescue. Enable students to implement the emergency response system for confined space emergencies, including site control and scene management. Operations : Enable students to assess existing and potential conditions at confined space emergencies. Enable students to protect themselves and others from hazards within and near the confined space. Enable students to recognize and manage physical and psychological challenges affecting rescuers entering confined spaces. Enable students to understand the roles and duties of all rescue team members. Enable students to conduct continuous or frequent interval monitoring at a confined space. Enable students to perform entry-type rescues and use victim packaging devices in large, unobstructed confined spaces. Enable students to use rope-based lowering and raising systems in high-angle environments. Technician : Enable students to develop hazard isolation and control strategies. Enable students to plan responses for entry-type rescues in hazardous environments. Enable students to implement planned rescue responses. Enable students to use victim packaging devices suitable for confined spaces with small portals or internal congestion.  
- [Course 200816: Technical Rescuer (Rope Rescue Awareness Level, Operations Level, and Technician Level)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4067782): Awareness Level Help students recognize the need for rope rescue. Help students identify resources necessary to conduct rope rescue operations. Help students carry out the response system where rope rescue is required. Enable students to carry out site control and scene management. Enable students to recognize general hazards associated with rope rescue and understand procedures to mitigate these hazards. Enable students to identify and utilize personal protective equipment (PPE) used at rope rescue incidents. Operations Level Help students size up existing and potential conditions at rope rescue incidents. Help students ensure safety during rope rescue operations. Help students determine the need for, and placement of, edge protection. Enable students to select, use, and maintain rope rescue equipment and systems. Enable students to tie all knots, bends, and hitches used by the organization. Enable students to select anchor points and equipment to construct and use single and multiple-point anchor systems. Help students select, construct, and use a belay system. Help students select and apply methods for negotiating edges or obstacles while protecting all nearby personnel from accidental falls. Enable students to ascend and descend a fixed line. Provide students with the knowledge to perform self-rescue. Enable students to select, construct, and use a lowering system in both low and high-angle environments. Enable students to secure a patient in a litter. Enable students to attach a litter to a rope system and manage its movement. Technician Level Enable students to assess a patient using techniques that require climbing up or down natural or manmade structures, with significant fall hazard exposure. Enable students to use rope rescue systems to move a rescuer and patient horizontally above obstacles or obstructions. Enable students to perform high-angle rescues of individuals suspended from or stranded on structures or landscape features. Enable students to apply physics principles in constructing rope rescue systems, including safety factors, critical angles, and understanding force multipliers. Enable students to perform high-angle rope rescues with a litter, including the use of tenders to navigate obstacles, reposition the patient, or provide medical care during raising and lowering operations.
- [Course 705869: Simulated Electronic Navigation - Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4092356): To enable students to: make appropriate decisions in complex navigational situations including navigation emergency situations. effectively plan, organize and manage a bridge team. comply with the standards regarding watchkeeping. handle the maneuver of a large vessel in confined water in a simulated environment. effectively coordinate a search and rescue operation. execute a voyage plan from berth to berth
- [Course 705870: Introduction to Ship Building and Naval Architecture](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4211014): To enable students to: Develop a working knowledge of common ship building and naval architecture terms Develop an awareness of ship operation and design features Develop an awareness of the regulatory bodies relevant to naval architecture and ship building
- [Course 705871: Introduction to Ship Building - Structures and Systems](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4284601): To enable the student to: Develop a working knowledge of ship building and repair. Develop an understanding of various systems and structural components found on ships.
- [Course 705872: Canadian Regulatory Food Safety Systems and Preventive Control Plans](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4290075): To enable participants to develop an understanding of: PCP requirements as promulgated in the Safe Food for Canadians Regulations (SFCR) Preventive Control Plans (PCPs): How they are developed, implemented, and maintained Hazard Analysis Critical Control Point (HACCP)
- [Course 705873: Introduction to Northern Inshore Fish Harvesting](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4478972): To enable participants to: Develop an understanding of the management of Northern fisheries resources Harness the opportunities presented by commercial fishery participation Develop the necessary seamanship skills, fishing gear knowledge, and fishing operations knowledge needed to participate safely in the Northern inshore fishery Develop an understanding of the personal and professional life adjustments involved with a career in the fishing industry
- [Course 500548: Basic Mathematics for Aquaculture Workers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4665000): To enable participants to: Review mathematical fundamentals. Apply appropriate equations to specific aquaculture scenarios. Practice solving mathematical problems within the aquaculture context.
- [Course 705874: Dynamic Positioning - DPO Specialization Shuttle Tanker](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4869111): At the end of the course the student should: Have acquired a thorough knowledge of the various types of Offloading Operations, including OLS (Offshore Loading System), SAL (Single Anchor Loading) and Tandem Loading from FPSO's and FSU's. Have the capability to operate the DP System in various modes associated with offshore loading operations i.e. Joystick, Auto Position, Approach, Weather Vane. Have the ability to carry out Offshore Loading Operations according to field procedures, guidelines and to best practice. Have the ability to react correctly to any unforeseen DP incidents
- [Course 705875: Dynamic Positioning - Offshore Loading Phase 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4869113): At the end of the course the student should: Have an understanding of the forces involved, related to ship handling in general and offshore loading in particular. Be able to plan and carry out manual manoeuvers in port, confined waters and at offshore installations. Have knowledge and understanding of the use of all propulsion machinery, navigational equipment, thrusters, steering systems and deck equipment involved with manual manoeuvering. Have knowledge and understanding of the use of anchors. Have knowledge and understanding of the use of tugs. Have knowledge and understanding of the use of rate of turn techniques.
- [Course 705876: Dynamic Positioning - Offshore Loading Phase 2](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4869121): At the end of the course the student should: Have acquired a knowledge of unwanted shuttle tanker DP incidents. Have gained a good understanding of a DP system's capabilities and limitations in offshore loading operations. Be able to carry out contingency planning related to offshore loading operations. Have acquired an understanding of offshore loading procedures for various field types. Be able to properly use position reference systems for offshore loading operations. Understand the requirements and guidelines that apply to Shuttle Tanker DPO's.
- [Course 705877: Dynamic Positioning - Offshore Loading Phase 3](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4869123): At the end of the course the student should: Have acquired a knowledge of the latest unwanted shuttle tanker DP incidents and statistics in Shuttle Tankers DP incidents. Have gained an understanding of the proper use of procedures relating to different oil fields and the use of DP checklists. Have been updated regarding the latest developments in offshore loading manuals and development of new oil fields. Have been updated regarding he latest editions of competence requirements and guidelines. Have gained an understanding of the latest developments in positions reference systems for DP
- [Course 705878: Flight Deck Officer (Canadian Coast Guard)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=4959432): 1.0 Flight Deck Officer’s Responsibilities 2.0 Helideck Suitability and Equipment 3.0 Helideck Operations 4.0 Cargo Loading (Internal and External) 5.0 Dangerous Goods 6.0 Fuelling Control and Procedures
- [Course 705879: Pilot Ladder Boarding Operations](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5180409): To provide students with the knowledge to be able to: Examine pilot ladder construction and condition and evaluate whether it is safe to use. Identify hazards associated with climbing a pilot rope ladder. Know when it is, and is not, safe to undertake a marine transfer and the effective use of ALL STOP (abort and reassess risks). Understand and be resilient to peer and client pressure. Review basic sea survival techniques. Prepare for practical field training.
- [Course 705880: Introduction to Business Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5194191): To enable the student to become familiar with: Principles and practices of modern business Development of general business skills as applied in the modern workplace Understanding of business planning and organization Enhancement of workplace problem-solving and decision-making skills Knowledge of basic principles associated with human resource management, marketing, accounting, and finance
- [Course 705881: Electronic Positioning Systems/Simulated Electronic Navigation Operational](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5283624): Part A : Students will: Understand the principle operation theory of bridge electronic navigation systems. Use shipboard navigation systems for position fixing. Use land-based navigation systems for position fixing. Use satellite-based systems for position fixing. Operate navigation equipment correctly. Part B : Students will: Prepare and execute a safe open sea passage. Use electronic navigation systems to fix the ships position on a marine chart. Plot other vessels, and take necessary action to avoid collision without putting the vessel at risk. Follow master standing orders, and maintain a bridge log.
- [Course 705882: Supervision of an Oil Transfer Operation (SOTO) - Part A](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5473415): This course will introduce topics leading to the attainment of the following goals by the end of SOTO - Part C: To enable the student to identify, discuss and properly use various pipeline  configurations commonly found on an unmanned tank barge; To enable the student to identify, discuss and properly use various pumping arrangements and configurations commonly found on an unmanned tank barge; To enable the student to demonstrate proficiency with respect to  operational maintenance on an unmanned tank barge; To enable the student to demonstrate proficiency with respect to planning cargo disposition and quantifying the cargo on an unmanned tank barge; To enable the student to demonstrate proficiency with respect to completing regulatory and company paperwork on an unmanned tank barge; To enable the student to demonstrate proficiency of knowledge with respect to tank-barge-to-tank-barge and tank-barge-to-ship-tranfers when not alongside; To enable the student to demonstrate proficiency of knowledge with respect to pollution prevention regulations and environmental response; To enable the student to demonstrate proficiency of knowledge with respect to radio communications between unmanned tank barge and shore facility and between unmanned tank barge and proper authorities; To enable the student to demonstrate knowledge on the written examination of all aspects related to supervising oil transfer operations on board an unmanned tank barge;
- [Course 705883: Environmental Response Awareness](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5494121): To enable the participant to understand basic concepts associated with environmental spill response To show the participant the impact and consequences of environmental spills To acquaint the participant with facilities and organizations tasked with response to environmental spills To familiarize the participant in common small spill cleanup strategies and techniques
- [Course 705884: Introduction to Environmental Response](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5494131): This course is designed to enable participants to: Develop awareness of the risks associated with oil spill response activities Identify the risks of pollution to their own community Correctly apply oil containment and sorbent equipment Focus on team approach in emergency situations Safely don Personal Protective Equipment for an emergency oil spill
- [Course 705885: Dockside Water Safety and Emergency Response](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5851908): To enable course participants to identify the hazards involved with dockside working in Newfoundland and Labrador; To enable course participants to identify the regulations covering docks and dockside working in Newfoundland and Labrador; To enable course participants to identify the dangers of cold water immersion; To enable course participants to identify the safety features and rescue equipment that are required on government docks in Newfoundland and Labrador; To enable course participants to identify the personal buoyancy equipment for use when working on docks; To enable course participants to use the correct techniques to manage the recovery of person overboard from a dock; To enable course participants to manage the post recovery handling of a person rescued from cold water; and To enable course participants to develop drills for rescue using workplace equipment and facilities.
- [Course 705886: Supervision of an Oil Transfer Operation (SOTO) – Part B](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5892784): General Vessel Maintenance General Seamanship Practical Barge Session
- [Course 705887: Spill Awareness (Oceanex)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5892786): To enable participants to identify the spill recovery equipment on-site To provide participants with an understanding of the general use of spill recovery equipment. To introduce participants to on-site clean up procedures
- [Course 705888: Spill Response (Oceanex)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5892788): To enable participants to identify the spill recovery equipment on-site. To provide participants with an understanding of the general use of spill recovery equipment. To introduce participants to on-site clean up procedures. Provide participants the opportunity to lead a spill response drill
- [Course 204001: Supervisor of Oil Transfer Operations - Part C](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5901606): To enable the student to identify, discuss and properly use various pipeline configurations commonly found on an unmanned tank barge; To enable the student to identify, discuss and properly use various pumping arrangements and configurations commonly found on an unmanned tank barge; To enable the student to demonstrate proficiency with respect to operational maintenance on an unmanned tank barge; To enable the student to demonstrate proficiency with respect to planning cargo disposition and quantifying the cargo on an unmanned tank barge; To enable the student to demonstrate proficiency with respect to completing regulatory and company paperwork on an unmanned tank barge; To enable the student to demonstrate proficiency of knowledge with respect to tank-barge-to-tank-barge and tank-barge-to-shiptranfers when not alongside; To enable the student to demonstrate proficiency of knowledge with respect to pollution prevention regulations and environmental response; To enable the student to demonstrate proficiency of knowledge with respect to radio communications between unmanned tank barge and shore facility and between unmanned tank barge and  proper authorities; To enable the student to demonstrate knowledge on the written examination of all aspects related to supervising oil transfer operations on board an unmanned tank barge;
- [Course 705889: Fast Rescue Boat (Emergency Services)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=5923174): To provide the student with an understanding of the construction, maintenance, repair and outfitting of fast rescue boats. To provide the student with the knowledge and skills to take charge of the equipment and appliance during launch and recovery from a trailer. To provide the student with the knowledge and skills to take charge of a fast rescue boat, following trailering operations. To provide the student with the knowledge and skills to take charge of fast rescue boat once waterborne. To provide the student with the knowledge and skills to operate a fast rescue boat.
- [Course 705891: Introduction to Foraging](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6417120): To enable the participant to: Forage safely and sustainably Experience a practical foraging activity Use foraged foods/ingredients
- [Course 705892: Small Boat Operations and Navigation](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6418527): To enable course participants to identify the regulations governing the construction and operation of boat trailers. To enable course participants to explain the construction and outfitting of small vessels. To enable course participants to identify the individual items of equipment on small vessels. To enable course participants to identify the safety precautions required when launching and recovering a small vessel to/from a boat trailer. To enable course participants to understand the operation of small vessels. To enable course participants to understand how to navigate a small vessel. To enable course participants to explain how to conduct pre-use inspections of trailers, boats and equipment. To enable course participants to understand the operation of small vessel engines and accessories.
- [Course 705893: Leadership Fundamentals](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6459750): This course will develop the participant's ability to: Recognize and analyze core traits to be an effective leader. Understand the importance of inclusive leadership. Identify strategies to improve inclusion. Explore how to lead teams through cohesion effectively. Develop a personal leadership vision.
- [Course 705894: Leadership and Onboard Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6471801): To enable course participants to: Effectively manage shipboard personnel and their training Effectively manage workload, stress, and fatigue Effectively manage resources Carry out effective decision-making
- [Course 705896: Aquaculture Health and Safety](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6608530): To enable the participant to Outline Aquaculture Occupational Health and Safety issues and regulations Outline the structure of Occupational Health and Safety in the workplace at both provincial and federal levels Explain and use the Workplace Health Management Information System (WHMIS) Identify hazards related to working on an aquaculture site and how to control them Outline the procedure for accident/incident reporting Make the workplace a safer place to work
- [Course 705897: Communications for Aquaculture Managers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6608653): To develop effective, respectful, and inclusive workplace collaboration skills To examine leadership skills, styles, and ethical awareness To employ strategies to manage workplace conflict To examine public relations in terms of government and media relations To write clear, concise, well-formatted business and technical documents To deliver clear, concise, and confident presentations
- [Course 705898: Introduction to Aquaculture](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6608661): To enable the participant to: Understand the origins of aquaculture and its importance to the Canadian economy Know which species are cultured in Canadian aquaculture and their economic value Understand the basic life history of key species in Canada, and the methods by which they are cultured Understand the difference between land-based and open-ocean culture systems and why they are used Be aware of the influence of public perception on the industry Be able to identify new innovations in aquaculture Have a basic understanding of how the industry is governed in Canada
- [Course 705899: Introduction to Salmonid Aquaculture](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6608683): To enable the participant to: Describe what a salmonid is and the typical life cycle. Identify the top three farmed salmonid species globally and where Canada stands in total global production. Describe the process by which salmonids are moved through the farming system at each stage of their life cycle. Describe the criteria for broodstock selection and the spawning method. Describe the early life stages of salmonids and how they are maintained in a culture environment. Identify the types of grow-out systems used in salmonid farming. Describe the basics of land-based, recirculating aquaculture systems. Describe the basics of open water fish culture. Describe the methods used for the transport, harvesting, and quality control of salmonids.
- [Course 705900: Introduction to Shellfish and Seaplant Aquaculture](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6608695): To enable the participant to: Describe shellfish and sea-plant aquaculture practiced in Canada Describe the biology and life cycles of cultured shellfish and sea-plants Identify conditions and methods of shellfish aquaculture Identify conditions and methods of sea-plant aquaculture Describe harvesting and processing for the shellfish and sea-plant industry Describe industry challenges and mitigation strategies for invasive species and climate change
- [Course 705904: Technical Surface and Swift Water Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=6948331): To enable participants to be efficient and confident to perform Surface Water Rescue procedures as a member of an Emergency Response Team.
- [Course 705906: Portable Fire Extinguishers and Corporate ERP (Vehicle Operators and Technicians)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7051088): To enable students to understand company ERP, fire spread and fire hazards. To enable students to operate portable fire extinguishers.
- [Course 705907: Portable Fire Extinguishers and Corporate Emergency Response Plans (Administrative Personnel)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7051092): Company ERP Review Fire Science and Fire Spread Classification of Fires Fire Hazards Portable Fire Extinguishers
- [Course 705908: Escort Tug Crew Resource Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7098945): The student will be able to: Comprehend Maritime Crew Resource management as it applies to the safe and efficient operation of ships. Understand the factors affecting human performance relating to managing ships. Develop good communication, situational awareness and anticipation skills. Develop the capacity to build a shared mental model. Apply explicit task allocation. Establish a shared vocabulary to facilitate communication and leadership at sea.
- [Course 705909: Maritime Incident Investigation](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7461055): By the end of the course, participants will be able to: Explain the reasons for carrying out an investigation Understand how to collect evidence Describe the causes of incidents and accidents Understand the significance of the human element in incidents Analyze direct causes and root causes (including control management failures) Create an event map Develop corrective actions post event Describe the process for follow-up
- [Course 705910: Dynamic Positioning Revalidation Course](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7466361): This course will enable participants to: Acquire knowledge of the latest rules and regulations. Acquire knowledge of the latest developments with sensors and Position Reference Systems. Acquire knowledge of the latest relevant DP Incidents and why they occurred. Recognize the various alarm, warning, and information messages. Carry out operational planning, risk assessment and hazard identification tasks. Set up the DP system for a particular task/operation. Decide on courses of action in the event of systems failure.
- [Course 705911: Introduction to Underwater Surveying](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7494809): This course will develop the participant's ability to: Understand foundational underwater surveying principles and applications. Assess fundamental underwater surveying methods, techniques, and workflows. Appreciate the multi-disciplinary nature of underwater surveying strategies. Develop a connection between underwater surveying theoretical knowledge and its practical application.
- [Course 705912: Project Management in the Blue – Green Economy](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7494811): This course will provide students with: An entry level understanding of projects and how they are managed. Knowledge required to plan, schedule, lead, and terminate a project.
- [Course 705913: De-carbonization of the Shipping Industry](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7494813): This course will develop the participant's ability to: Understand ports and ship carbon emissions. Describe technology used to reduce carbon emissions. Summarize the research and development of fuels. Discuss safety and operational risk management. Discuss international regulations.
- [Course 705914: Introduction to Marine Renewable Energy](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7494824): This course will provide the student with an: Overview of marine renewable energy and resources Introduction to current and emerging technologies that exploit marine renewable energy resources. Introduction of MRE environmental, political, and economic constraints. Informed voice in Marine Renewable Energy (MRE) technology discussions and decisions.
- [Course 705915: Introduction to Cybersecurity](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7494829): This course will develop the participant's ability to: Understand the fundamentals of Cybersecurity. Recognize common cybersecurity threats. Highlight best practices in information technology security to mitigate risk. Explore tools used in cybersecurity to identify risks and protect against attacks. Identify common examples of cybersecurity attacks.
- [Course 705916: Introduction to Artificial Intelligence](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7494831): This course will develop the participant's ability to: Understand the meaning of Artificial Intelligence. Describe the basic concepts of Machine Learning. Summarize the functionality of Deep Learning in AI. Identify practical uses of AI in today's world. Understand the ethical implications associated with AI.
- [Course 705917: Ballast Control Stability III Refresher](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7494916): This course will enable course participants to: To refresh the students’ knowledge for the necessities of operating a ballast and related systems on a simulated Mobile Offshore Drilling Unit (MODU) safely. To enable students to detect and react to simulated faults which can take place in the ballast and related systems on a MODU. To prepare the students for emergencies by instructing them in pollution prevention measures.
- [Course 705918: An Introduction to the Culture of Salmonids in Recirculating Aquaculture Systems](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7516894):     Salmonid Biology and Production Cycles     Introduction to Aquaculture Facilities     Activities and Maintenance     Introduction to Biosecurity     Disease Prevention and Control     Facility Disease Monitoring and Reporting     Feed Selection and Monitoring     Feeding Methods     Feed Storage and Handling
- [Course 705919: Regulatory Fisheries Management Framework](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7518307): Role of Government in Fisheries Management Indigenous Fisheries International Fisheries Fisheries Science Technical Measures I (input and output controls) Technical Measures II (Fishing Gear and Area and Time Restrictions) Integrated Fisheries Management in Canada (IFMP) Monitoring, Control & Surveillance (MSC)
- [Course 705920: Introduction to Coastal Restoration](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7774589): Causes of Coastal Ecosystem Degradation An Introduction to Coastal Ecosystem Restoration Efforts in Atlantic Canada Planning and Implementing Coastal Restoration Projects Measuring Success: Methods for Monitoring Coastal Ecosystems
- [Course 705921: Escort Tug Advanced Maneuvering](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7840183): The student will be able to: To enable participants to undertake maneuvering of a Voith Schneider escort tug in challenging scenarios that could occur outside of normal operating conditions. To enable participants to identify maneuvering techniques and practices to utilize during escort operations. To provide participants the opportunity to practice or enhance their ship handling skills under realistic conditions using a full mission bridge simulator.
- [Course 705922: Helicopter Firefighting and Rescue](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7840186): Introduction and Safety Helicopter construction Rescue Helicopter firefighting and rescue equipment Emergency response
- [Course 705924: Electric Vehicle Safety Awareness](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=7986823): Enable the student to recognize battery electric vehicles. Identify the hazards associated with the carriage of electric vehicles. Determine the appropriate actions for incidents involving battery electric vehicles. Develop awareness of the myths and challenges associated with the carriage of BEVs onboard.
- [Course 705926: Applied Mechanics - 2nd Class (Block Accredited)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8115756): To provide students with a working knowledge of mechanics and the application of mechanics to physical systems found onboard a vessel.
- [Course 705927: Applied Thermodynamics - 2nd Class (Block Accredited)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8115758): To provide students with basic understanding of thermodynamics principles. To enable students to understand the movement of heat and how this applies to engines. To give students the mathematical tools to solve basic thermodynamic problems.
- [Course 705928: Naval Architecture - 2nd Class (Block Accredited)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8115760): To provide students with required Naval Architecture knowledge from IMO Model Course 7.02 and TP 2293E (Version 8) in preparation to challenge the Naval Architecture – 2NAR Transport Canada examination. To provide students with the problem-solving skills required to perform calculations important for stability. To provide students with the knowledge and skills to sketch and understand ship construction and ship arrangements.
- [Course 705929: Electrotechnology - 2nd Class (Block Accredited)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8115762): To provide the students with a working knowledge of electrotechnology and the applications of electrotechnology to systems found on board a vessel.
- [Course 705930: Technical Drawing - 2nd Class (Block Accredited)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8115764): To provide students with a basic knowledge of engineering drafting fundamentals. To enable students to create acceptable technical drawings and sketches in order to transmit technical information. To provide students with the knowledge to create general assembly drawings in a 2D format that transmits all relevant information in a standard format.
- [Course 705931: Escort Tug Combined Operations (Level 3)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8116448): 1.0 Apply escort tug practices to large tonnage tankers at speeds outside of normal operating conditions and speeds. 2.0 Undertake emergency towing applications in various weather and sea state conditions. 3.0 Steering and braking (direct/indirect) with laden tankers in varying failures (steering, blackout). 4.0 Escort operation in confined waters. 5.0 Simulated Exercises.  
- [Course 705932: Study Tour for Northern Fisheries Enterprise Management](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8116468): 1.0 Introduction to Gear Technology 2.0 Introduction to Seafood Processing 3.0 Introduction to Offshore Safety & Survival 4.0 Introduction to Ocean Technology 5.0 Introduction to Factory Freezer Trawler
- [Course 705938: Sensory Evaluation of Northern Shrimp](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8537737): To enable the participant to: Demonstrate the ability to detect tainted, decomposed, and unwholesome products Develop practical procedures for use in the sensory analysis of northern shrimp
- [Course 705939: Sensory Evaluation of Cod](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8537739): To enable the participant to: Demonstrate the ability to detect tainted, decomposed, and unwholesome products Develop practical procedures for use in the sensory analysis of cod
- [Course 705940: Sensory Analysis of Seafood](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8537741): To enable the participant to: Develop an understanding and knowledge in the field of sensory science Develop an understanding and knowledge of the criteria necessary to conduct sensory evaluation
- [Course 705941: Ocean Technology ROV/ASV Workshop](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=8834764): To provide participants with: Understanding of ROV safe operations and maintenance. Understanding of ASV safe operations.
- [Course 705942: Inclusive and Respectful Workplace](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=9006788): Foundations of Inclusion and Respect: Understand the core principles of equity, diversity, inclusion, and respect, including the impact of unconscious bias on workplace relationships. Workplace Culture and Psychological Safety: Explore how culture, power dynamics, and microaggressions influence employee wellbeing and inclusion. Human Rights and Workplace Policies: Learn about legal responsibilities, respectful workplace policies, and roles of employees and leaders in maintaining a safe environment. Accountability and Responsibility: Develop skills in bystander intervention, reporting processes, and leadership modeling for inclusive behavior. Building Everyday Inclusion: Strengthen allyship and practical techniques for fostering inclusion and respect in daily workplace interactions.  
- [Course 705946: RADAR and ARPA Essentials for Ice Observers](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=9046694): This course will develop the student’s ability: To plot positions of targets on a chart and to obtain range and bearing of the targets as well as course and speed. To understand function and operation of RADAR and ARPA. To use RADAR to obtain range and bearing and to plot these on a chart to obtain Latitude and Longitude. To use ARPA to obtain range and bearing as well as course and speed of targets. To help the Radar Ice Observer obtain relevant information and to identify that could be encountered along the East Coast of Newfoundland and Labrador To ensure the Radar Ice Observer understand the importance of standard watchkeeping practices in a marine environment
- [Course 705950: Aircrew Survival Training (AST)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=9657723): Participants will be provided with updated knowledge, skill, and proficiency regarding: Hazards associated with the marine environment, offshore petroleum installations, and helicopters. Alarms and emergencies on board offshore petroleum installations and helicopters; and Survival and rescue equipment and procedures on board offshore petroleum installations and helicopters.
- [Course CB705702: Restricted Operator's Certificate - Maritime Commercial](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=10409161): Students will: know the basic features of the maritime mobile service know how to operate basic ship station equipment be able to follow GMDSS system and subsystem operational procedures relate theoretical knowledge of GMDSS to practical communication procedures
- [Course CB701803: SEN Limited (SEN-L)](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=10409504): Upon course completion, the student will: Possess sufficient knowledge on the use of and setup procedure of RADAR and other basic electronic equipment found on a merchant ship. Demonstrate a proficiency in piloting and collision avoidance using the RADAR and RADAR plotting sheets.
- [Course CB705726: Ship Construction and Stability, Level 1](http://localhost:7070/search/publicCourseSearchDetails.do?method=load&courseId=10409514): This course is specifically directed towards fishing vessel operators and deals with the basic theory and application of construction and stability as it applies to fishing vessels in various conditions of load. Participants will gain an understanding of the principles on which fishing vessel stability is based that allows for the safe operation of fishing vessels under various conditions of load. This course offering is delivered by the Community-Based Education Unit

## Certificates

There are no currently available certificates.


LAST_UPDATED: 2026-09-11